StorageTek 6 manual row-list, column-list, Audit, Notes, COLumn

Audit

ROW

optionally specifies that only certain rows within the specified LSM panel are to be audited.

(row-list)

row-listmay be a single row or a list of rows. Ranges are not allowed. If a list is specified, the elements must be separated by blanks or commas, and the entire list enclosed in parentheses.

If this parameter is specified, the LSM and PANel parameters may contain only one element.

A row-listelement is a one or two digit decimal number.

•For 4410 and 9310 LSMs, valid row entries are 0 through 14 (0 indicates the top row and 14 indicates the bottom row).

•For 9360 (WolfCreek) LSMs, rows 0 through 41 can be specified with the exception of panel 1, which contains only four usable cells (rows 35 through 38).

•For 9740 LSMs, valid row entries are 0 through 41 on panels 0, 2, and 3; and 36 through 41 on panel 1.

•For SL8500 libraries, valid row entries are:

-0-26 on a standard panel

-0-12 on a short panel (panels 2-4, 6-7)

-6-12 on a PTP panel (panel 5)

Notes:

1.On 9740s, column 3 on panel 2 allows row entries only on rows 28 through 41.

2.On 9740s, the cells on panel 3 are optional.

COLumn

optionally specifies that only certain columns (cells) within an LSM panel row are to be audited.

(column-list)

column-listmay be a single column, or a list of columns. Ranges are not allowed. If a list is specified, the elements must be separated by blanks or commas, and the entire list enclosed in parentheses.

If this parameter is specified, the LSM, PANel, and ROW parameters may contain only one element.

A column-listelement is a one or two digit decimal number.

204VM/HSC 6.0 System Programmer’s Guide

1st ed., 6/30/04 - 312579601