StorageTek 6 manual Issue the command

3.Make SLS.DBASE2 the new secondary control data set by issuing the command:

CDS ENABLE DSN=SLS.DBASE2

4. Issue the command:

DISPLAY CDS

to view the current control data set status and assignments.

•HSC BACKup and HSC RESTore procedure:

1.Stop the host software on all hosts.

2.Backup the control data set with the HSC BACKup utility.

3.Restore the control data set with the HSC RESTore utility. This will clear the control data set information in the Database Heartbeat record.

4.Start an HSC system, specifying the desired primary, secondary, and standby control data sets in the CDSDEF PARMLIB statement. During HSC 2.0 or higher initialization, the control data sets assigned as primary, secondary and standby will be recorded in the Database Heartbeat record.

Chapter 2. Host Software Component Functions 61

1st ed., 6/30/04 - 312579601