StorageTek 6 manual Invoking the Journal Offload Utility, SLSOFF02, Slsin, ACSUTIL SLKJCL File

Journal Offload

SLSOFF02

the created offload data set for the second journal (SLSJRN02).

Note: The offload data sets created by SLSOFF01 and SLSOFF02 must be allocated on DASD. You can then copy the offloaded DASD data sets to tape if you desire.

SLSIN

input to the utility in the form of control statement card images.

Invoking the Journal Offload Utility

The easiest way to run utilities is to execute the ACS UTIL exec by entering the following command:

EXEC ACS UTIL OFFLoad

Execution of the statement results in the ACSUTIL SLKJCL file:

ACSUTIL SLKJCL File

/JOB	jobname	SLUADMIN
/PARM	MIXED
/FILE	SLSPRINT	DEV PRNT CLASS A
/FILE	SYSPRINT	DEV PRNT CLASS A
/FILE	SLSCNTL	DEV <500> DSN <dsname>
/FILE	SLSJRN01	DEV <502> DSN <dsname>
/FILE	SLSJRN02	DEV <503> DSN <dsname>
/FILE	SLSOFF01	DEV <504> DSN <dsname>
/FILE	SLSOFF02	DEV <505> DSN <dsname>
/FILE	SLSIN	*

* OFFLOAD

To execute the utility:

1.Delete the lines in the template that are not required, or leave the comment indicator

(*) in column one.

2.Remove the comment indicator from the desired lines.

3.Specify values for the desired parameters.

4.Delete the parameters that are not desired.

5.Enter the command ‘‘FILE.’’

The job file is then submitted to the ACS service machine for execution.

254VM/HSC 6.0 System Programmer’s Guide

1st ed., 6/30/04 - 312579601