StorageTek 6 manual Unitdef, host-id, Examples, Specify a Data Set Containing UNITATTR Statements

UNITDEF

HOSTID

(This parameter is valid only for use in PARMLIB, so that multiple systems can share a PARMLIB member containing TAPEREQ, VOLATTR, or UNITATTR statements for different releases of HSC. If entered from the console, message SLS0018I is issued.)

Optionally, limits the execution of this control statement to the specified hosts. If one of the specified hostids matches the host executing this control statement, the control statement is executed for that host. Otherwise, it is ignored. If this parameter is omitted, the control statement is executed on all hosts.

host-id

specifies the name of one or more hosts from which to execute this control statement. Multiple hosts must be separated by commas.

Examples

The following example illustrates the use of the UNITDEF command and control statement.

Specify a Data Set Containing UNITATTR Statements

UNITDEF DSN(‘HSC.DEF(UNITDEF)’)

UNITDEF DATASET(‘HSC.PARMLIB(MVSUNITS)’) VOLUME(MVSA01)

UNITDEF DATASET(SYSB.UNITDEFS) UNIT(A90)

142VM/HSC 6.0 System Programmer’s Guide

1st ed., 6/30/04 - 312579601