StorageTek 6 manual Reconfiguration, Save ACS SYSPROF on the RUN-diskB

Reconfiguration

16.XEDIT ACS SYSPROF B to remove the comments from the AUTOJOB statements.

Note: Make sure that the AUTOJOB file name matches the new startup job file created earlier.

Modify the SLSCNTL, SLSCNTL2, and SLSSTBY data set names to match the new names.

17.Save ACS SYSPROF on the RUN-disk (B).

18.Issue the following command to restart the ACS service machine:

AUTOLOG STKACS

19.Change any startup files (SYSPROF, STARTUP JCL, and/or PROCs) for other hosts to reflect the new configuration.

Notes: The MDISK links for other hosts may also need to be changed depending on your configuration.

20.From MAINTSTK, back up the new control data set by issuing the following command:

EXEC ACS UTIL BACKUP

21.Audit any panels that changed while reconfiguring the library.

Caution: When an LSM panel is replaced, the contents of the original panel are not retained in the CDS. The entire new panel must be audited to update the CDS.

22.When the reconfiguration completes successfully, issue on MAINTSTK:

ERASE ACSOLD SYSPROF A

Chapter 4. Utility Functions 275

1st ed., 6/30/04 - 312579601