StorageTek 6 manual Backup Invoking the BACKup Utility, ACSUTIL SLKJCL File

Backup

Invoking the BACKup Utility

The easiest way to run utilities is to execute the ACS UTIL exec by entering the following command:

EXEC ACS UTIL BACKUP

Execution of the statement results in the ACSUTIL SLKJCL file:

ACSUTIL SLKJCL File

/JOB	jobname	SLUADMIN
/PARM	MIXED
/FILE	SLSPRINT	DEV PRNT CLASS A
/FILE	SLSCNTL	DEV <vaddr>	DSN <dsname>
/FILE	SLSCNTL2	DEV <vaddr>	DSN <dsname>
/FILE	SLSBKUP	DEV <vaddr>	DSN <dsname>
/FILE	SLSCOPY1	DEV <vaddr>	DSN <dsname>
/FILE	SLSCOPY2	DEV <vaddr>	DSN <dsname>
/FILE	SLSJRN01	DEV <vaddr>	DSN <dsname>
/FILE	SLSJRN02	DEV <vaddr>	DSN <dsname>
/FILE	SLSIN	*

* BACKUP OPT(COPY)

To execute the utility:

1.Delete the lines in the template that are not required, or leave the comment indicator

(*) in column one.

2.Remove the comment indicator from the desired lines.

3.Specify values for the desired parameters.

4.Delete the parameters that are not desired.

5.Enter the command ‘‘FILE.’’

The job file is then submitted to the ACS service machine for execution.

218VM/HSC 6.0 System Programmer’s Guide

1st ed., 6/30/04 - 312579601