StorageTek 6 manual Starting the HSC

Starting the HSC

The HSC software can be initialized in three ways:

•Start the ACS service machine via the CP AUTOLOG command.

•Issue the ACS INIT command from the service machine virtual console.

•Submit the HSC startup SLKJCL to the ACS service machine, if the SCP is already executing but without the HSC.

Parameters associated with the /PARM statement in the HSC startup SLKJCL (see “Creating an SLKJCL File for Starting the HSC” on page 157) can also be supplied via a PARM= option with the ACS INIT command and the ACS SUBMIT command. Specifying the PARM= option appends the parameters specified to the parameters on an existing /PARM statement, or creates a new /PARM statement. In this way, most of the startup parameters can be overridden.

The HSC can be initialized to a full or base service level via parameters on an existing /PARM statement in the startup SLKJCL, or by issuing the ACS INIT or ACS SUBMIT commands with the PARM= option.

Chapter 3. HSC Control Statements and HSC Start Procedure 165

1st ed., 6/30/04 - 312579601