StorageTek 6 Database Decompile Syntax, Utility Name, Parameters, JCL Requirements, Libgen, Slsin

Database Decompile

Syntax

LIBGEN

Utility Name

LIBGEN

specifies that database processing is to be performed and invokes the SLUDBMAP module. SLUDBMAP creates a complete HSC LIBGEN from an existing control data set.

Parameters

None.

JCL Requirements

The following definitions apply to the LIBGEN utility JCL:

SLSPRINT

output messages from the utility program.

SLSCNTL

the primary control data set. This statement is required.

Note: SLSCNTL should be the copy of the CDS currently selected as the primary

CDS. Two ways to determine the identity of the primary CDS are:

•issue the Display CDS command, and look at PRIVOL

•run the BACKup OPTion(Analyze) utility and note the ‘‘ddname was selected as the control dataset to output’’ line in the output report (ddname is the name of the current primary CDS).

SLSLIBGN

the output data set to accommodate the LIBGEN created by the utility. The data set has these characteristics: LRECL=80, fixed-blocked format (multiple of 80). This is a PUNCH file. This statement is required.

SLSIN

input to the utility in the form of control cards.

226VM/HSC 6.0 System Programmer’s Guide

1st ed., 6/30/04 - 312579601