quick start
Placement
Single
When using multiple subwoofers it is preferable to stack these in a block in order to take advantage of mutual coupling between units, which will result in improved bass response and a lower cut- off frequency. Speakon cable interconnects are neatly routed at the rear of the box, allowing a stack to be placed directly against a wall.
bass amplifier
bass amplifier
Speakon pin connections
The Speakons are wired as shown below
Speakon pin wiring
Pin 1+ positive
Pin 1- negative
Pin 2+ N/C
Pin 2- N/C
| 1+ |
2- | 1- |
| 2+ |
|
| Back | Front |
Technical Specifications |
|
|
|
Dimensions | 420mm x 1000mm x 470mm (16.5” x 39.4” x 18.5”) | ||
Net Weight | 47kgs (103.4lbs) |
| |
Frequency Response | 38Hz to 200Hz @±4dB (useful to 30Hz) | ||
Power Handling | 800 watts r.m.s., 1600 watts program |
| |
Impedance | 4 ohms nominal |
| |
Sensitivity | 100dB, 1 watt @ 1 metre |
| |
Calc Max SPL | 132dB continuous, 138dB peak |
| |
Recommended Crossover | 24dB/ocatve | ||
|
| ||
Construction | 15mm (5/8”) birch plywood |
| |
Rigging | 16 x M10 internal rigging points |
| |
Options | TurboBlue or white | ||
Spares & Accessories | 12” LF driver |
| |
| recone for |
|
Page 3