Dual LMU Environment

In a library configuration containing more than one LSM, if a cartridge exchange operation occurs to obtain the cartridge for mounting, the cartridge may be returned by one of these possible ways:

If the MNTD Float command is set to ON (the HSC initial value), the cartridge is returned to any new cell location in the LSM containing the tape transport from which it was dismounted. For more information about the MNTD Float command, refer to Chapter 2, ‘‘Commands, Control Statements, and Utilities’’ in the HSC Operator’s Guide.

If the MNTD Float command is set to OFF, the cartridge is passed through to the origin LSM and placed into its originating cell location. For more information about the MNTD Float command, refer to Chapter 2, ‘‘Commands, Control Statements, and Utilities’’ in the HSC Operator’s Guide.

If the LSM is full, the cartridge is passed thru to another LSM and placed in any cell location.

A temporary enter on a mount operation means an eject upon dismount (the cartridge does not remain in the LSM).

The library control data set is automatically updated to reflect the new location of the cartridge.

Dual LMU Environment

In a dual LMU environment, the HSC maintains contact with both LMUs. Both LMUs are varied online. One LMU functions as the master LMU and the other functions as the standby LMU. Requests and responses are channeled through station paths on the master LMU. Paths on the standby LMU are online, but not used.

The master LMU continually informs the HSC of the status of the standby LMU. The HSC informs the operator when status changes.

The standby LMU constantly polls the master LMU. If the master LMU fails, the standby LMU informs the HSC that status has changed. The standby becomes the master. The HSC also informs the operator that the previous master LMU is not communicating.

At switchover, the HSC:

notifies the operator that switchover is occurring

verifies the configuration for the LMU

sends the new master LMU all the work that was in progress

terminates ENTER operations.

After switchover, the HSC sends the new master all ACS requests.

Switchover should not affect movement in process. All moves should complete. If not, the cartridges become errant and are found when the LSMs perform ‘‘quick initialization’’ processing. ENTER operations must be restarted after switchover.

Chapter 1. System Description 15

1st ed., 6/30/04 - 312579601

Page 45
Image 45
StorageTek 6 manual Dual LMU Environment