StorageTek 6 JCL Requirements, Invoking the Audit Utility, ACSUTIL SLKJCL File, INTRANs, Notes

Audit

INTRANs

optionally specifies that in-transit cartridges in an LSM are to be processed. All in-transit cartridges, except those identified in the note below, are read and ejected as part of an AUDIt utility operation.

Notes:

1.INTRANs is mutually exclusive with the APPLY(NO) parameter. It can be used in combination with all other AUDIt parameters.

2.Only the first two cells (columns 0 and 1) in a 9310 playground are accessible to an in-transit audit. Cartridges in other cell positions in a 9310 playground (columns 2 through 5) cannot be ejected by an in-transit operation.

3.9740 diagnostic cells cannot be scanned by an audit.

JCL Requirements

The following definitions apply to Audit utility JCL:

SLSPRINT

output messages from the utility program.

SLSIN

input to the utility in the form of control cards.

Invoking the Audit Utility

The easiest way to run utilities is to execute the ACS UTIL exec by entering the following command:

EXEC ACS UTIL AUDIT

Execution of the statement results in the ACSUTIL SLKJCL file:

ACSUTIL SLKJCL File

/JOB	jobname SLUADMIN
/PARM	MIXED
/FILe	SLSPRINT	DEV PRNT CLASS A
/FILE	SLSIN	*

*AUDIT ALL APPLY (YES)

*AUDIT ACS(acsid) LSM(lsm-list) PANEL(panel-list) CAP(capid) -

*ROW(row-list) COLUMN(col-list) APPLY(YES)

To execute the utility:

1.Delete the lines in the template that are not required, or leave the comment indicator

(*) in column one.

2.Remove the comment indicator from the desired lines.

Chapter 4. Utility Functions 207

1st ed., 6/30/04 - 312579601