StorageTek 6 manual SLSSMF fname ftype fmode, Activities Report, Parm, Mixed, Nohd

Activities Report

PARM

parameters to the SLUADMIN program that drive the utility.

MIXED

specifies that output is to be mixed case. The default is uppercase.

NOHD

specifies that page headers are not to be printed. The default is to print page headers.

SLSCNTL vaddr DSN dsname

specifies the name of the library’s primary control data set (dsname). The default is obtained from the ACS SYSPROF file. The caller must have the volume it is on accessible as the given device address (vaddr). This parameter is required so that the SMF record type code may be retrieved.

SLSPRINT DISK fname ftype fmode or SLSPRINT PRINTER

identifies the definition of the output file to be produced. The output may either go to the named file or directly to a print spool file. This file contains the output messages and report from the utility.

SLSSMF fname ftype fmode

identifies the names of the SMF data files (output by the SLUPERF utility) to be examined. The filename specified will be used as a parameter to the CMS LISTFILE command to produce a list of all qualified files. See the documentation for that command for details on special wildcard symbols which may be used.

SLSIN ACTIvities parms

specifies the input to the utility taken from the parameter list that follows (see ‘‘Syntax’’ and ‘‘Parameters’’ below).

Chapter 4. Utility Functions 187

1st ed., 6/30/04 - 312579601