Manuals / StorageTek / Household Appliance / Water System

StorageTek 6 manual Unitattr, MODel

Models: 6

1 718

Download 718 pages 10.93 Kb

Page 168

Manual background

UNITATTR

MODel

optionally, specifies the model number of a tape transport.

Notes:

1.If the model specified does not match that reported by the LMU, an error results which causes all UNITATTRs to be rejected.

2.The SL8500 library supports only the T9x40 (9840/T9840B/T9840C and T9940A/T9940B) model types.

4480

indicates a 4480 (18-track) tape transport.

4490

indicates a 4490 (36-track Silverton) tape transport.

9490

indicates a 9490 (36-track Timberline) tape transport.

9490EE

indicates a 9490EE (36-track Timberline EE) transport.

SD3

indicates an SD-3 (RedWood) tape transport.

9840

indicates a 3490E-image 9840 transport.

984035

indicates a 3590-image 9840 transport.

T9840B

indicates a 3490E-image T9840B transport.

T9840B35

indicates a 3590-image T9840B transport.

T9840C

indicates a 3490E-image T9840C transport.

T9840C35

indicates a 3590-image T9840C transport.

T9940A

indicates a 3490E-image T9940A transport.

T9940A35

indicates a 3590-image T9940A transport.

T9940B

indicates a 3490E-image T9940B transport.

138VM/HSC 6.0 System Programmer’s Guide

1st ed., 6/30/04 - 312579601

Image 168

StorageTek 6 manual Unitattr, MODel

Contents

System Programmer’s Guide Release312579601 Host Software Component VM ImplementationExport Destination Control Statement Restricted RightsLimitations on Warranties and Liability Proprietary Information StatementDocument Effectivity Doc Kit NumberHost Software Component for Document EffectivityivVM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Contents What’s New With This Release?Preface xxviiMatching VOLATTR and TAPEREQ Statements Chapter 4. Utility Functions SCP Environment Invoking the BACKup Utility Utility Name Page Chapter 6. Performance Considerations Page How to Specify a CAPid Reconfiguration utility Appendix B. CP Commands and DIAGNOSE Codes Appendix C. Record FormatsAppendix D. Logging ACS Robotics Motion Appendix E. Remote-linkedLibraries GlossaryIndex Figures Figure Tables Table 28. Performance Parameters Controlled by PARMLIB Control Statements Table 67. Format for Total Motions and Temporary Error Counts xxivVM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -What’s New With This Release? Installation GuideInstallation Guide Installation GuideInstallation Guide System Programmer’s GuideSystem Programmer’s Guide System Programmer’s GuidePreface ScopeIntended Audience Organization of This GuideHow to Use This Guide References to HSC Product Releases Related PublicationsReader’s Comments StorageTek Product SupportxxxVM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Chapter 1. System Description Automated Cartridge System OverviewTimberWolf 9740 10-cellremovable magazine or 14-cellpermanent rack Host Software Component Overview HSC Subsystem Components HSC ArchitectureAPPLICATIONS COMMONCONTROL SERVERSVM Environment VM Operating System CP and CMSSystem Control Program SCP Storage ManagementDevice Management File ManagementTask Management Job ManagementProcessor Management CommunicationVirtual Machine Configuration Task Recovery/TerminationHost Software Component HSC Tape Management System TMSHSC and Automated Cartridge System Interaction 10VM/HSC 6.0 System Programmer’s GuideFigure 2. Virtual Machine Relationships Chapter 1. System DescriptionFigure 3. Shared Library Data Sets 12VM/HSC 6.0 System Programmer’s GuideAutomated Mount Automated Dismount14VM/HSC 6.0 System Programmer’s Guide Dual LMU Environment User Control of HSC Functions MacrosUtilities PARMLIB Control StatementsCommands 18VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Chapter 2. Host Software Component Functions Overview of HSC FunctionsAutomatic Functions of the HSC Installation Functions HSC Service Levels Description of Base Service LevelInitialization/Termination Functions Description of Full Service Level Command Service Level ExecutionBase FullService Level Execution UtilityBase FullDisplaying/Setting Service Level Starting the HSC Subsystem at Base Service LevelMedia Type and Recording Technique Processing 26VM/HSC 6.0 System Programmer’s Guide1st ed., 6/30/04 - MEDia and RECtech Parameters MEDIA TYPESRECORDING TECHNIQUES Model Parameter MODelResulting RECtech Matching VOLATTR and TAPEREQ Statements Specific Volume Requests Nonspecific Volume RequestsPrecedence of VOLATTR and TAPEREQ Statements Scratch SelectionHow To Resolve Scratch Shortages •Standard and 36track •Long and 36track Mount Processing for Specific Volumes Mount/Dismount FunctionsMount Processing for Scratch Volumes Dismount Processing for Library VolumesAbnormal Mounts/Dismounts HSC Mount Command Support Example of Mount Command with Readonly OperandVirtual Thumbwheel VTW Tape Management InterfaceTape Transport Cleaning Automated Tape Transport CleaningActivating Automated Cleaning Identifying Cleaning Cartridges NotesNotes Over-use Over-limitand Spent Cleaning Cartridges Managing Over-useCleaning Cartridges Managing Cleaning Cartridges Manual Tape Transport Cleaning42VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Volume/Cell Control Functions Moving Volumes within the LibraryScratch Subpool Management Scratch Threshold Task Restart Cartridge Access Port CAP Processing Functions Entering Cartridges into the LibraryCAP Mode Considerations Ejecting Cartridges from the LibraryCAP Exception Processing Releasing an Allocated CAP 48VM/HSC 6.0 System Programmer’s GuideUsing Multiple CDS Copies Near Continuous OperationsAutomatic Recognition of Configuration Changes Automatic Update of LSM from 4410 toRun-timeRecognition of 9740 CAP Configuration Defining Planned ACSs with no Stations Changing Panels •To remove cartridges from rows on panels to facilitate hardware e.g., cabling changes Using CDS Rename/Relocate/Expand CDs CommandRenaming/Relocating a CDS - Scenarios Renaming a CDS CopyRelocating an Uncataloged CDS Copy Expanding a CDS - ScenarioCDS ENABLE DSNACS.DBASENEW NEWLOC CDS EXPAND56VM/HSC 6.0 System Programmer’s Guide Swapping Library Transports - New Model Types Common Recovery Functions Control Data Set RecoveryControl Data Set Recovery Techniques User Control of Control Data SetsAllocation of Control Data Sets Dynamic Enable/Disable of Control Data Sets 4. Issue the command Command Functions Figure 5. HSC Command Functions Overview62VM/HSC 6.0 System Programmer’s Guide Controlling LSM Operating Mode Controlling CAP Operating ModeViewing the Interior Components of an LSM •A VIew request is sent to the controlling LMU Utility Functions Figure 6. Utility Functions OverviewChapter 2. Host Software Component Functions LMU Server Functions Dual LMU FunctionalityIf the Master LMU Fails If the Standby LMU FailsLMU Switchover Messages After an LMU Switch OccursHSC/LMU Software Combinations Adding New Stations to an ACS JCL to Add New Stations to an ACSNotes for the Example Reconstructing a LIBGEN Recovery Maintenance Requirements Dynamic LMU ConnectionHSC Port Number Assignments Multiple TCP/IP Stack Implications Transitioning Between 3270 and TCP/IP 3270 to TCP/IPTCP/IP to Recovering TCP/IP Communications Operator Intervention - Single LMU Configuration Operator Intervention - Dual LMU ConfigurationCommunication Lost to Master LMU Communication Lost to Standby LMUConfiguring VM for TCP/IP Support System Definition File ACS SYSDEFSystem Profile File ACS SYSPROF HSC Startup Job File ACS SLKJCLInitializing the LMUPATH Definition Data Set Commands to Format OS MinidiskCommands to Format CMS Reserved Minidisk Minidisk Statement for the LMUPATH Data SetLMUPATH Definition Data Set JOB SLSXUTIL SLUGENER /PARM RECCOPYFILE SYSPRINT DEV PRNT CLASS A FILE SYSUT2 DEV <vaddr> DSN <dsname> /FILE SYSUT1Host-to-HostCommunications Services Types of Communications ServicesCommunication Functions Information Passed Between HostsHow Communications Services are Set or Changed Chapter 2. Host Software Component FunctionsSwitching Communications Paths Tape Management Interface Software RequirementsBatch Application Program Interface API 82VM/HSC 6.0 System Programmer’s GuideOverview PARMLIB Control StatementsDefining PARMLIB Control Statements Processing PARMLIB Control Statements Options Offered by PARMLIB Control StatementsCAP Preference Definition Control Data Set DefinitionCommunications Path Definition EXECPARM Control DefinitionJournal Data Set Definition License Key InformationControl Statement Continuation Conventions Reconfiguration CDS DefinitionOption Control Scratch Subpool ControlCDSDEF CDS Definition CDSDEF Control Statement SyntaxCDSDEF Control Statement NameParameters DISABLEExample DSN3SLS.DSTBY,VOL3HSC103,UNIT3503,+ DISABLECDSDEF CDSDEF DSN1SLS.DBASE,VOL1HSC101,UNIT1501,+EXECParm EXECParm Control Statement SyntaxControl Statement Name EXECParmEXECParm Control Statement - Command Prefix Off EXECParmHOSTID ExampleJRNDEF Journal Definition JRNDEF Control StatementSyntax Control Statement NameJRNDEF UNITxFULL AbendLKEYDEF LKEYDEF Command and Control Statement Command NameParameter Descriptions dataset-nameLKEYDEF unitnamehost-id UNITLKEYINFO product-identifiercustomer-name nnnnnnnlicense-key-string ExamplesLKEYINFO RECDEF SyntaxControl Statement Name RECDEFRECDEF ExampleRECDEF DSN1SLS.DBASE,VOL1HSC101,UNIT1501,+ DSN2SLS.DBSEC,VOL2HSC102,UNIT2502SCRPOol Scratch Subpool Control Statement SyntaxControl Statement Name SCRPOolSCRPOol RANGENotes LABELOther Methods of Controlling Scratch Subpools SCRPOolExample Definition Data Set Control Statements OPTion TITLE LMU PathLMU Parameter Definition Scratch Subpool Parameter Statement DefinitionDefining LMU Network Connections Defining Tape Request Attributes TAPEREQVolume Attribute Volume Attribute DefinitionDefining Volume Attributes VOLATTR Defining Unit Attributes UNITATTRIdentifying the Definition Data Sets OPTION TITLE Control Statement Continuation ConventionsLMUPATH LMUPATH Control Statement LMUPATH UsageSyntax Control Statement NameLMUPATH lmu_hostnamennn.nnn.nnn.nnn LMUADDRLMUPDEF LMUPDEF Command and Control Statement 110VM/HSC 6.0 System Programmer’s GuideLMUPDEF dataset.nameSyntax Control Statement NameLMUPDEF Load the LMUPATH Parameters From YOUR.DSNMEMBERunitname host-idOPTion TITLE OPTion TITLE Control Statement identifying-stringSyntax Control Statement NameOPTion TITLE Example114VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -SCRPDEF SCRPDEF SyntaxControl Statement Name ParametersLoad the SCRPOol Parameters From YOUR.DSNMEMBER SCRPDEFunitname host-idTAPEREQ Tape Request TAPEREQ Control Statement TAPEREQ UsageTAPEREQ Disabling a TAPEREQ DefinitionTAPEREQ 120VM/HSC 6.0 System Programmer’s GuideTAPEREQ SyntaxTAPEREQ Syntax continued TAPEREQ122VM/HSC 6.0 System Programmer’s Guide job-name step-nameTAPEREQ Control Statement Nameprogram-name DD-nameTAPEREQ PROGram or PGMnameretention-period expiration-dateTAPEREQ EXPDTTAPEREQ LONGItudStandard ECARTTAPEREQ ZCARTDD3A, DD3B, DD3C STK1TAPEREQ RECtechNotes LONGItudTAPEREQ 36AtrackTAPEREQ STK1RCsubpool-name TAPEREQ4490 Set Tape Request Attributes TAPEREQExample 132VM/HSC 6.0 System Programmer’s GuideTREQDEF TREQDEF SyntaxControl Statement Name ParametersLoad the TAPEREQ Parameters From YOUR.DSNMEMBER TREQDEFunitname host-idUNITATTR Unit Attribute UNITATTR Control StatementUNITATTR Usage UNITATTR unit-addressSyntax Control Statement NameUNITATTR MODelSpecify Unit Attribute Statements UNITATTRT9940B35 IGNOREUNITDEF 140VM/HSC 6.0 System Programmer’s GuideUNITDEF SyntaxControl Statement Name ParametersUNITDEF host-idExamples Specify a Data Set Containing UNITATTR StatementsVolume Attribute VOLATTR Control Statement VOLATTRVOLATTR Usage Disabling a VOLATTR Definition VOLATTR144VM/HSC 6.0 System Programmer’s Guide This syntax diagram is continued on the next page VOLATTRSyntax VOLATTR SERial volserVOLATTR Syntax continuedControl Statement Name VOLATTRvolser or vol-rangeor vol-list VOLATTRParameters SERialVOLATTR Valid media types areVOLATTR ZCARTDD3A, DD3B, DD3C, DD3D STK1VOLATTR STK2P, STK2WRECtech LONGItudVOLATTR indicates a 9490 Timberline transportuse-limit VOLATTRSTK1RC34 Set Volume Attributes VOLATTRExample VOLATTR SERIALL*,AA9* MEDIAECARTVOLDEF 154VM/HSC 6.0 System Programmer’s GuideVOLDEF SyntaxControl Statement Name ParametersLoad the VOLATTR Parameters From YOUR.DSNMEMBER VOLDEFunitname host-idCreating an SLKJCL File for Starting the HSC PARM StatementPARM Statement Parameters SyntaxRESET SSYSCOLD RECONFIG MemberDialog BothHSC Startup Job ACS SLKJCL Sample ACS SLKJCL File ExampleDescription of /FILE Statement NotesSLSSYSXX Configuration Mismatches Starting HSC ExecutionModifying LSMs Online Specifying CAP PreferencesMultiple Hosts Startup Considerations 164VM/HSC 6.0 System Programmer’s GuideStarting the HSC Initializing the HSC to the Full Service Level Syntax for Initializing HSC to Full Service LevelInitializing the HSC to the Base Service Level Syntax for Initializing HSC to Base Service Level168VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Chapter 4. Utility Functions Overview of Library UtilitiesSelecting a Utility FunctionUtility to Use Restore or recreate the library CDS Typical Use of Utilities Control Statement Syntax Conventions Utility Syntax ConventionsUtility Environmental Requirements ACS UTIL Exec CMS Environment ACSCMS EXECSCP Environment ACSUTIL SLKJCL fileJCL and Control Statements SCP Batch Job Control Language JCLJOB Statement jobnamePARM Statement parmsCOMM Statement commentsSubmitting Jobs fnameftype fmodeUtility Control Statements Control Statements vs. JCLUtility Administrator SLUADMIN How to Invoke SLUADMINHow to Invoke Utility Programs SLUADMIN Program Return CodesReturn Code DescriptionReports Created by Utilities Report HeadingsParameters Controlling Report Headings Example of JCL Using Report Heading Options ExampleDATE=2YR DATE=4YRStand-AloneUtilities Activities Report Utility Activities ReportSLUACTV EXEC typeSLSSMF fname ftype fmode Activities ReportPARM MIXEDSyntax Utility NameParameters begin-dateend-date end-timeActivities Report TODAYInvoking the Activities Report Utility Control File ExampleOutput Description Control File to Produce an Activities ReportActivities Report TotalActivities Report % of allAve. time Ave. pass-thrusUsage Notes Activities ReportEarliest LatestActivities Report •LSM operating statistics record, subtype 1, andActivities Report ACS IDARM USE P-THRUActivities Report Usage Notes196VM/HSC 6.0 System Programmer’s Guide Activities Report Figure 9. Activities Report Utility Sample OutputChapter 4. Utility Functions 1st ed., 6/30/04 -Audit Utility AuditMedia Type Mismatch Conditions AuditActions Permitted During an Audit How the AUDIt Utility FunctionsAudit Concurrent Audits Auditacs-id AuditSyntax Utility Namelsm-list panel-listAudit PANelrow-list column-listAudit Notescap-id AuditAudit EMPTYCelDIAGScan NotesJCL Requirements Invoking the Audit UtilityACSUTIL SLKJCL File AuditJCL Examples JCL for Audit of Entire Library all ACSsJCL for Selective Audit 1 ACS, 2 LSMs, with CAPid AuditJCL for Selective Audit of Diagnostic Cells Only JCL for Selective Audit of Empty CellsAudit Output DescriptionAudit Figure 10. AUDIt Utility Sample Output210VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Backup Utility BackupReasons for Running the BACKup Utility PrerequisitesBackup How the BACKup Utility Functions Backup Backup Procedure Backup BACKupSyntax Utility NameBackup PrimarySecondary STandbyBackup RestartBackup JCL Requirements SLSPRINTSLSCNTL SLSCNTL2Backup Invoking the BACKup Utility ACSUTIL SLKJCL FileBackup JCL Examples JCL for Running BackupRun Backup Utility JCL for Running a Copy BackupBackup Output Description•the following data sets Backup •a condition code from backup processing4warning MESSAGES – Backup successful Chapter 4. Utility FunctionsBackup Figure 11. BACKup Utility Sample Output 1 of222VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Backup Figure 11. BACKup Utility Sample Output 2 ofChapter 4. Utility Functions 1st ed., 6/30/04 -Backup How to Restart Backup Related Utilities224VM/HSC 6.0 System Programmer’s Guide Database Decompile LIBGEN Utility Database DecompileHow the Database Decompile Utility Functions PrerequisitesDatabase Decompile Syntax Utility NameParameters JCL RequirementsInvoking the Database Decompile Utility JCL ExampleJCL for Database Decompile Database DecompileDatabase Decompile Output Description DeviceLabel DescriptionDatabase Decompile Chapter 4. Utility Functions1st ed., 6/30/04 - Database Decompile 230VM/HSC 6.0 System Programmer’s Guide1st ed., 6/30/04 - Database Decompile Chapter 4. Utility Functions1st ed., 6/30/04 - Database Decompile 232VM/HSC 6.0 System Programmer’s Guide1st ed., 6/30/04 - Database Decompile Chapter 4. Utility Functions1st ed., 6/30/04 - Database Decompile 234VM/HSC 6.0 System Programmer’s Guide1st ed., 6/30/04 - Database Decompile Chapter 4. Utility Functions1st ed., 6/30/04 - Directory Rebuild Utility Directory RebuildReasons for Running the Directory Rebuild Utility How the Directory Rebuild Utility FunctionsDirectory Rebuild Invoking the Database Decompile UtilitySLSCNTL, SLSCNTL2, SLSSTBY SLSINDirectory Rebuild JCL Example JCL for Directory RebuildOutput Description Eject Cartridge Utility Eject CartridgeSyntax Eject Cartridge Utility NameEJECt Eject Method 2 continuedEject Cartridge Parameters vol-listcount VOLserEject Cartridge •CST •MEDIA1 •STD •1 •3480Eject Cartridge Note: STK2P can be abbreviated to PEject Cartridge indicates a 3490E-image9840 transportcap-list Eject CartridgeInvoking the Eject Cartridge Utility Eject CartridgeJCL Requirements ACSUTIL SLKJCL FileJCL for Ejecting a Single Volume JCL to Eject One STD Scratch CartridgeJCL to Eject Five SD-3Scratch Cartridges Eject CartridgeEject Cartridge Output Description Figure 13. EJECt Cartridge Utility Sample Output248VM/HSC 6.0 System Programmer’s Guide Enter Cartridges Utility Enter CartridgesCAP Operating Instructions SyntaxInvoking the Enter Cartridges Utility Enter CartridgesJCL Requirements SCRatchJCL for Entering Cartridges in a CAP Enter CartridgesJCL Example Output DescriptionEnter Cartridges Figure 14. Enter Cartridge Utility Sample Output252VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Journal Offload Utility Journal OffloadSyntax Utility NameInvoking the Journal Offload Utility Journal OffloadSLSOFF02 SLSINJournal Offload JCL Example JCL for Offload of JournalsOutput Description Journal Offload Figure 15. Journal Offload Utility Sample Output256VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Move Utility MoveMOVe Considerations lsm-id MoveSyntax Utility Namepanel Moverow-list column-listMove JCL Requirements Invoking the Move UtilityACSUTIL SLKJCL File Move Several Volumes From an LSM to Another LSM Move JCL ExamplesOutput Description Move Figure 16. MOVe Utility Sample Output262VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Performance Log Reblocker Utility Performance Log ReblockerSyntax CMS Statement Performance Log Reblocker utilityPerformance Log Reblocker mvsnode Performance Log ReblockerJCL Requirements classReconfiguration Utility ReconfigurationReasons for Running the Reconfiguration Utility Considerations Before Running Reconfiguration DASD Considerations in a VM-onlyEnvironmentReconfiguration How the Reconfiguration Utility Functions Reconfiguration268VM/HSC 6.0 System Programmer’s Guide I/O Considerations ReconfigurationCondition Number of I/OsRunning a Successful Reconfiguration Minimizing I/O TimeReconfiguration NotesReconfiguration 7.Log on to STKACSReconfiguration Comment out any AUTOJOB statementsReconfiguration e. Copy the updated SYSPROF to the RUN-diskReconfiguration q.Issue the following commandReconfiguration 17.Save ACS SYSPROF on the RUN-diskBRestore Utility RestoreReasons for Running the RESTore Utility How the RESTore Utility FunctionsRestore RESToreUtility Name ParametersRestore JCL RequirementsOnly ShortRestore Invoking the Restore Utility JCL ExamplesACSUTIL SLKJCL File JCL for RESTore with Journals Applied JCL for RESTore with GENerate OnlyRestore 280VM/HSC 6.0 System Programmer’s GuideJCL for RESTore Journals and Output to SLSAUDIT RestoreOutput Description Restore Figure 17. Restore Utility Sample Output282VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -How to Handle BACKup/RESTore Discrepancies RestoreScratch Redistribution Utility Scratch RedistributionHow the Scratch Redistribution Utility Functions Scratch Redistribution Syntax Utility NameSCREdist Chapter 4. Utility FunctionsScratch Redistribution Parameters tolerance-valueacs-id lsm-listScratch Redistribution expnumlsmScratch Redistribution indicates any Standard, ECART, or ZCART cartridgeScratch Redistribution indicates any T9840 cartridgeindicates a device using helical recording Scratch RedistributionScratch Redistribution indicates any T9940A transportScratch Redistribution JCL Requirements Invoking the Scratch Redistribution UtilityJCL Examples ACSUTIL SLKJCL FileJCL to Perform Scratch Redistribution Scratch RedistributionJCL to Perform Scratch Redistribution JCL to Perform Scratch RedistributionScratch Redistribution Output Description 294VM/HSC 6.0 System Programmer’s GuideScratch Update Utilities Scratch UpdateUtility Names SCRAtch utilityScratch Update Parameters Invoking the Scratch Update UtilitiesJCL Requirements vol-listJCL to Scratch, Unscratch, and Replace Scratch UpdateJCL Example Output DescriptionScratch Update Figure 19. Scratch Update Utilities Sample Output298VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -SET Utility How the SET Utility Functions SET OptionAffected HSCs All Other HSCsConsiderations Before Running the SET Utility Summary of SET Utility OptionsSET Option SET Utility Function and Location of DescriptionSet Syntax Note: This syntax is continued on the next pageChapter 4. Utility Functions SET ACS Esoteric esotericUtility Name ParametersSET Cleaning Prefix SET CLNPRFX PROCEDURESET HSC Command Prefix prefixCharacter DescriptionSET Eject Password SET Delete DispositionSCRTCH NOSCRTCHoldpswd SET Freeze PanelFREEZE SET Host ID newhostoldhost SET HSC LevelSET ENQ/DEQ/RESERVE QNAME qnameSET New Host model-hostSET Scratch Label Type SET Device Numbers for Drivesesoteric FORHOSTaddr0,...addr19 Running SET SLIDRIVS With the HSC Active FORLSMIDlsm-id FORPANELSET SLIDRIVS Procedure SET LMU Station Address Numbersstat1,...,stat16 SLISTATNSET Recovery Technique SET SMF Record Typelibtype FORACSSET TCHNIQE PROCEDURE JCL RequirementsSHADOW BOTHInvoking the Set Utility ACSUTIL SLKJCL FileSet JCL Examples JCL for Set UtilityJCL for Multiple SET Statements Output DescriptionUnselect Utility UnselectSyntax Unselect Utility Name Invoking the Unselect UtilityParameters JCL RequirementsJCL to Unselect a Volume UnselectJCL Example Output DescriptionUnselect Figure 20. Unselect Utility Sample OutputChapter 4. Utility Functions 1st ed., 6/30/04 -Volume Report Utility Volume ReportMedia Type and Recording Technique Considerations Volume ReportVolume Report •change the VOLATTR statementsVolume Report Syntax Volume Report Utility Name volser or vol-range or vol-listParameters acs-idVolume Report SORTVolume Report INCLudeVolume Report MEDEQUALNONMEDEQ NOEXTernalVolume Report VOLISTVOLDATA CDSDATAJCL/Parameter File Requirements Volume ReportSLSCNTL, SLSCNTL2, SLSSTBY SLSPRINTJCL/Parameter File Syntax SLSCNTLvaddr control.set.namefn, ft, fm keywordsSLSCDATA CMS only SLSSCRPL CMS onlySLSVA CMS only PARMparameters JOB SCP onlyVolume Report Invoking the Volume Report Utility SLUVOLR EXEC CMSParameter File ACSUTIL SLKJCL FileJCL to Produce a Volume Report Volume ReportJCL Example JCL to Produce a Volume Report for an MVS PDS Report Detail LinesMedia and Recording Technique Origin Volume ReportMedia Type Prefix Characters Errant, Scratch, Selected FieldsExternal Label Field Cartridge Usability CLN USE FieldVolume Report Totals Subpool ID FieldTimes Selected Field Totals ReportsVolume Report Flat Files Volume ReportVolume Report Chapter 4. Utility Functions1st ed., 6/30/04 - Volume Report 344VM/HSC 6.0 System Programmer’s Guide1st ed., 6/30/04 - Volume Report Chapter 4. Utility Functions1st ed., 6/30/04 - 346VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Messages Abend CodesHSC Messages SCP MessagesSoftware Trace Facilities CP Trace TableCCWTRACE VM CP Debug Commands SCP SET TRACE CommandTRACE Command Syntax SCP Internal Trace TableMaster Trace Table Header Trace Table EntriesDSP Trace Entry Code QueryIPARML IUCV Parameter List TTEWORD1= IRT address TTEWORD2 = IPARML bytesIPARML for IUCV CONNECT to *BLOCKIO InputsIPARML for IUCV SEND to *BLOCKIO Inputs=target class 1=write; 2=read =flags type=2way =relative block number =data buffer addressIPARML for IUCV RECEIVE Inputs= target class = flagsIPARML for IUCV REPLY Inputs= IUCV message id = target classIPARML for IUCV SEVER Inputs= name of virtual machine connected to OutputsIPRCODE IUCV Interrupt Buffer IPTYPEInterrupt Type IPARML for Pending Connection Interrupt IPARML for Connection Complete Interrupt IPPATHID = IUCV path idIPTYPE = 03=severed, 04=quiesced, 05=resumedIPARML for Incoming Message Interrupt IPARML for Message Complete Interrupt Diagnostic Capabilities Error Recording Data Set RecordsSCP Trace Facility Supervisor Call and Abnormal End DumpsSCP External Trace Facility SCP Trace Formatter Utility EXECSLUETRAC 368VM/HSC 6.0 System Programmer’s Guideinfn inftinfm outfnSupervisor Call SVC Functions 370VM/HSC 6.0 System Programmer’s Guide1st ed., 6/30/04 - Refer to Table DecimalFunction SCP GTRACE Emulation The valid EID ranges are HSC Internal Trace Table Figure 23. HSC Internal Trace Table Example HSC TRACE Command Format of HSC GTRACE USR RecordsDiagnostic Commands VM CP CommandsSCP Debug Mode Setting Initialization Sequence Break-Pointsoffset lengthSCP Diagnostic Subsystem Commands Enabling the Diagnostic Subsystem=DEBUG =NODEBUG =DDICTfieldname =HPER epnameoffset length=WHERE addressepname HSC Diagnostic Commands LIst CommandSyntax Parameters data-structureDISPLAY Command sizeaddress CDS Recovery Capabilities Dynamic Recovery of the Control Data SetControl Data Set Recovery 386VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Figure 24. Control Data Set Recovery Scheme Control Data Set Error Diagnostics Control Data Set ProcessesControl Data Set Integrity During Restore Detecting Mismatch of Control Data SetsRecommended Recovery Actions Information Required for StorageTek DiagnosisHow to Request a Dump Dump ProcessingType of Dumps Supported What to do When a Dump Occurs Note Reason For DumpMove Problem Materials to Tape Load Dump and CONSLOG Onto DiskCall StorageTek Software Support Dump Analysis Using SLUIPCS SLUIPCS SCAN Subcommands VIEWVIEW CVT VIEW CCVT VIEW NUCON VIEW MTT VIEW STORMAN VIEW LVT VIEW structnameData Structures Data StructuresIHAASCB EX EXECUTE CMS COMMAND FINDTRB SAVE AREA TRACEBACK TTE TRACE TABLE ENTRYWA WHERE ADDRESS WN WHERE NAMESTAT STATUS TASK FIND TASKMajor SCP Data Relationships SLUIPCS PRINT OptionsCommand, Message, Trace Processing Figure 25. Command, Message and Trace Processing1st ed., 6/30/04 - NUCON X’10’ VECTPTR TRCTABDiagnostic Techniques SCP Task/Job Data RelationshipsSubsystem Data Relationships Figure 26. SCP Task/Job Data Relationship NUCON JBLOK PSAAOLD JBLTASK TBLOK PSATOLDTKRBLIST RQBLOKFigure 27. Subsystem Data Relationships 404VM/HSC 6.0 System Programmer’s GuideNUCON CVT VECTPTR CVTJESCT JESCT JESSSCT SSCT SSCTSCTA SSCTSSVT SSCTCommon Dump Analysis Tasks Find a Module Plus Offset, Given an AddressFind a Module Address, Given a Name View an HSC or SCP Data AreaIdentify the Failing Routine Find the Failing TaskFind the Failing Request Block Save Area Trace Back Find the LVTFind the LCT, LST, HST Identify the Last Interrupt EventGather Diagnostic Materials Diagnostic MaterialsExamine an SDWA Find IUCV Path Descriptorsdetails of problem circumstances •STKACS abend Tape Format Tape ReturnChapter 6. Performance Considerations How Library Activity Affects Library PerformanceOverview Using the Activities Report Utility Monitoring Library Activity and PerformanceHow Operators Control Library Performance Tape Volume Report ACS Daily ReportRedistribute Scratch Volumes in the Library Maintain Quantities of Scratch CartridgesDefine CAP Preferences 414VM/HSC 6.0 System Programmer’s GuideUse SMF Records to Collect Performance Data Use PARMLIB to Define Static ParametersOperator Command Performance ParameterJournal Definition Define High Dispatching Priority for the HSC Set High-Performance Host-to-HostCommunicationsFunctioning of Host-to-HostCommunications Designation of Communication parameters418VM/HSC 6.0 System Programmer’s Guide Define Secondary and Standby Control Data Sets Limit View Time to Maintain High PerformanceExcessive Use of VIew Command Affects Performance How to Monitor Usage of the VIew CommandAdvantages of Using the VIew Command Chapter 6. Performance Considerations 1st ed., 6/30/04 -Loading Cartridges Into the Library Reduce Pass-ThrusUnavoidable Pass-Thrus Unnecessary Pass-ThrusScheduled Pass-Thrus Ways to Reduce Pass-ThruActivityReduce Operator Intervention Ensure adequate free cellsEject through the CAP closest to the cartridge Redistribute cartridges during off-peaktimesACSPROP EXEC Reduce Tape Transport ContentionPrefetch Enters Avoid Crashing Test SystemsReduce Scheduling Contention Usage RequirementsSyntax ParametersUse Performance Log Reblocker to Format Data Use the Audit Utility EffectivelyUse LSMs as Scratch Loaders in a Mixed ACS Commands Syntax Reference Syntax Flow DiagramsSpecifying Commands VariablesFlow Lines Single Required ChoiceDefaults Repeat SymbolSingle Optional Choice Default Value Value2 Value3Syntax Continuation Fragments Fragment432VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Library Identification How to Specify a CAPid CAPid FormatsLSM Model 4410 and PowderHorn LSM Model WolfCreek LSM Models 9360-050, 9360-075,and00indicates one of the following Ranges And Lists 436VM/HSC 6.0 System Programmer’s GuideA00A0-A99A0 438VM/HSC 6.0 System Programmer’s Guide The control statement for each utility program consists of a command indicating the utility function followed by parameters, as applicable, in 80-character card-imagerecords. The standard syntax conventions for control statements are as follows Control Statement Syntax ConventionsSCRPOOL NAME=STD36,RANGEAAA000AAA999 ZZZ000ZZZ999440VM/HSC 6.0 System Programmer’s Guide MEDia, RECtech, and MODel Parameters MODel, and RECtech parametersacs-id, lsm-id acs-id, lsm-idMount VOLATTR acs-id, lsm-idLIBGEN Macros 444VM/HSC 6.0 System Programmer’s Guide1st ed., 6/30/04 - SLIACS macro SLIALIST macroSLIDLIST macro SLIDRIVS macrosSLILIBRY macro 446VM/HSC 6.0 System Programmer’s Guide1st ed., 6/30/04 - SLILSM macro SLIRCVRY macroSLISTATN macro SLIRCVRYHSC Control Statements EXECParm control statementJournal Definition JRNDEF control statement 448VM/HSC 6.0 System Programmer’s GuideLKEYDEF command and control statement LKEYINFO control statementLMUPATH control statement VOLumevolserOPTion control statement Scratch Subpool SCRPOol control statement450VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Tape Request TAPEREQ control statement Tape Request TAPEREQ control statement continued 452VM/HSC 6.0 System Programmer’s GuideUnit Attribute UNITATTR control statement Volume Attribute VOLATTR control statement 454VM/HSC 6.0 System Programmer’s Guide1st ed., 6/30/04 - STK1RA STK1RA34 STK1RA35 STK1RB STK1RB34 STK1RB35 456VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Utilities ACTIvities Report utilityAUDIt utility ACSacs-idBACKup utility Database Decompile LIBGEN utilityDirectory Rebuild DIRBLD utility EJECt utilityEJECt utility continued Enter Cartridges utilityReconfiguration utility Journal OFFLoad utilityMOVe utility REPLace utilityRESTore utility SCRAtch utilityScratch Redistribution SCREdist utility 462VM/HSC 6.0 System Programmer’s GuideSET utility OptionsUNSCratch utility Unselect utilitySET utility continued 464VM/HSC 6.0 System Programmer’s GuideVolume Report VOLRpt utility Operator Commands CDs Enable/Disable commandCLean command 466VM/HSC 6.0 System Programmer’s GuideDISMount command Display command Display AcsDisplay ALl Display ALLOCDisplay Cmd Display COMMPathDisplay DRives CMd COmmandDisplay Drives continued 470VM/HSC 6.0 System Programmer’s GuideDisplay Exceptions Display LKEYDEFDisplay LMUPDEF Display LSMDisplay MONitor Display OPTionDisplay Requests 472VM/HSC 6.0 System Programmer’s GuideDisplay SCRatch Display SCRPDEF Display SRVlevDisplay Status 474VM/HSC 6.0 System Programmer’s GuideDisplay THReshld Display TREQDEFDRAin CAP command EJect commandDisplay Volume Display UNITDEFEject Command continued ENter command Journal commandMODify command MONITOR commandMount command volserdevaddr host-id480VM/HSC 6.0 System Programmer’s Guide MOVe command VolumeMOVe Flsmlsm-idOPTion command and control statement RECover Host commandRELease CAP command 482VM/HSC 6.0 System Programmer’s GuideSENter command SRVlev Service Level commandStop Monitoring STOPMN command SWitch commandTRace command TRACELKP commandVary Station command 484VM/HSC 6.0 System Programmer’s GuideVIew command Warn command 486VM/HSC 6.0 System Programmer’s GuideHSC Diagnostic Commands LIst commandTRace command 1st ed., 6/30/04 -SCP Operator Commands AUTHorize CommandCANCEL command CP CommandFILE Command HELP CommandModify Command SCP Query CommandReply Command SET Command490VM/HSC 6.0 System Programmer’s Guide destination eventsSLK Command STArt CommandSTOP Command STOPSCP CommandGCS Component Server Commands SLKGCS Command1st ed., 6/30/04 - CMS Operator Commands ACS EXECCMS HELP 494VM/HSC 6.0 System Programmer’s GuideAppendix B. CP Commands and DIAGNOSE Codes CP CommandsCP Programming Services OverviewIUCV 496VM/HSC 6.0 System Programmer’s Guide1st ed., 6/30/04 - Appendix C. Record Formats OverviewMapping Macros for SMF Records Mapping Macros for LOGREC RecordsMapping Macros for Batch API Records TypeSMF Records SMF Mapping MacrosSMF Record Formats SLSDVARCross Reference TypeSLSSFHDR Table 33. SLSSFHDR Record FormatType LengthTable 33. SLSSFHDR Record Format Continued TypeLength LabelTable 33. SLSSFHDR Record Format Continued TypeLength LabelCross Reference 504VM/HSC 6.0 System Programmer’s GuideName OffsetValue Appendix C. Record FormatsSLSSBLOS Cross Reference SIGNED-FWORDSLSSCAPJ Cross ReferenceSLSSCAPN Cross ReferenceSLSSVSTA Cross Reference SLSSVSTAAppendix C. Record Formats SLSSMLSM Cross ReferenceSLSSLSB Cross Reference Table 39. SLSSLSB Record Format ContinuedType LengthSLSSMF07 1.1 X’05’ CHARACTER CHAR CONST LENGTH Cross Reference 520VM/HSC 6.0 System Programmer’s GuideSMF07MVU Appendix C. Record Formats522VM/HSC 6.0 System Programmer’s Guide SLSSMF08 Cross Reference 524VM/HSC 6.0 System Programmer’s GuideLOGREC Records LOGREC Mapping MacrosLOGREC Record Formats SLSSLHDROFFSET Table 43. SLSSLHDR Record Format Continued TypeLength LabelCross Reference LTYPAREAAppendix C. Record Formats 530VM/HSC 6.0 System Programmer’s Guide SLSSVLG1 Cross Reference 532VM/HSC 6.0 System Programmer’s GuideSLSSBLOG Cross Reference 534VM/HSC 6.0 System Programmer’s GuideSLSSLLG1 CONST 1.. .... X’40’ Cross Reference 538VM/HSC 6.0 System Programmer’s GuideLLG1NWSN Appendix C. Record FormatsSLSSLLG2 Cross Reference HEXSTRINGSLSSLLG3 Cross ReferenceSLSSLLG4 Cross Reference 544VM/HSC 6.0 System Programmer’s GuideSLSSLLG5 1... .... X’80’ Cross Reference LLG5ACSAppendix C. Record Formats SLSSLLG6 1... X’08’ SIGNED-FWORD Cross Reference LLG6ACSAppendix C. Record Formats 552VM/HSC 6.0 System Programmer’s Guide SLSSDJLR Cross Reference CHARACTERSLSSPSWI Cross Reference 556VM/HSC 6.0 System Programmer’s GuideSLSSRL00 Cross ReferenceSLSSRL01 Cross ReferenceSLSSHLG1 1. .... X’20’ Cross Reference HLG1FLG1Appendix C. Record Formats Volume Report and Batch API Records Volume Report and Batch API Mapping MacrosVolume Report and Batch API Record Formats SLUVADAT1.. .... X’40’ HEXSTRING 1 ..1. X’12’ Cross Reference X’80’568VM/HSC 6.0 System Programmer’s Guide LSMNADLS Appendix C. Record Formats570VM/HSC 6.0 System Programmer’s Guide SLUVCDAT 1 X’01’ Cross Reference CFGCCPFXAppendix C. Record Formats SLUVHDAT 1.. .... X’40’ Cross Reference 576VM/HSC 6.0 System Programmer’s GuideSLUVIDAT CHARACTER Cross Reference CDSALLAppendix C. Record Formats SLUVSDAT Cross Reference STNACSAppendix C. Record Formats SLUVVDAT CHAR CONST CHARACTER CHARACTER X’20’ HEXSTRING HEXSTRING Cross Reference VOLDESTAppendix C. Record Formats 590VM/HSC 6.0 System Programmer’s Guide VOLRRCNL Appendix C. Record Formats592VM/HSC 6.0 System Programmer’s Guide Batch API Records Batch API Mapping MacrosTable 64. Mapping macros for Batch API Records Appendix C. Record FormatsBatch API Record Formats SLUVDDATCross Reference F0F1596VM/HSC 6.0 System Programmer’s Guide UVD994B5 Appendix C. Record Formats‘CVAL’ 1st ed., 6/30/04 -SLUVPDAT SIGNED-HWORD Cross Reference 600VM/HSC 6.0 System Programmer’s GuideName OffsetValue UVPTWSTD602VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Temporary Motion Error Counts Appendix D. Logging ACS Robotics MotionInformation Being Logged Robotics Motion Start CountsPermanent Motion Errors 604VM/HSC 6.0 System Programmer’s Guide1st ed., 6/30/04 - How Information is Logged BYTE #Description of Field 46-46 152-155 Motion Hard Fail Software Error Record BYTE #Description of Field Logging Interval Single-HostEnvironment Multi-HostEnvironmentLMU Response Codes Invalid Parameter Error Codes: 0101 - Configuration Error Codes: 0201 - CAP Procedural Error Codes: 0301 -General Procedural Error Codes: 0401 - LMU LAN Interface Error Codes: 0501 - 0426Drive not rewound 0427LMU Logical Error Codes: 0601 - LSM Robotics Error Codes: 0701 - LSM Hardware Error Codes: 0801 - LSM Logical Error Codes: 0901 -0921 Drive Error Codes: 1001 - Undefined Response Code1012 Load Failure on Special UseAppendix E. Remote-linkedLibraries OverviewAppendix E. Remote-linkedLibraries 1st ed., 6/30/04 -Configuration Figure 29. Configuration622VM/HSC 6.0 System Programmer’s Guide Configuration MVS/CSCAppendix E. Remote-linkedLibraries Configuration Figure 30. Configuration624VM/HSC 6.0 System Programmer’s Guide Configuration Figure 31. ConfigurationAppendix E. Remote-linkedLibraries Configuration Figure 32. Configuration626VM/HSC 6.0 System Programmer’s Guide Resolving CDS Issues After a Remote-LinkFailure Programming and Operational ConsiderationsControl Data Set Integrity •Prior to reestablishing the link QCDS Request How QCDS FunctionsInvoking QCDS SLSUREQ Macro OverviewAddresses and Registers VM RequirementSLSUREQ VM Requirements Parameters labelSyntax REQUESTThis parameter is required BUFFER QCDS Programming Considerations E,parmaddrNotes UCALADRReturn Codes Return Field NameDecimal Value and Description Invalid SLSUREQ RequestsSample QCDS Requests 636VM/HSC 6.0 System Programmer’s Guide WKFLATDDKFLATDDL,KFLATDD Initialize the working 638VM/HSC 6.0 System Programmer’s Guide Constants 640VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -RECORD AREAS IN AN ALTERNATING FASHION 642VM/HSC 6.0 System Programmer’s Guide PROCESS Output Description Request EnteredRecords Returned SLSUREQM Macro SyntaxParameters PRO=NO|YESBatch API Mapping SLSUREQM Macro A-ADDR SIGNED-FWORD CONST CONST Cross Reference SLSUACSA652VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 - 654VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Glossary Central Support Remote Center CSRC— See Page device separation— See drive exclusion directed allocation— See drive prioritizationPage Page Page Page Page Page Silverton— See 4490 Cartridge Subsystem Page Page Symbols Numerics8500 library— See StreamLine SL8500 library 670VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Index NumericsIndex 672VM/HSC 6.0 System Programmer’s Guide control data set definition control statement Index674VM/HSC 6.0 System Programmer’s Guide 377, 383, 676VM/HSC 6.0 System Programmer’s Guide Library Control Unit LCU, defined IndexACS 108, CAP 468, 478,cap-id 466, 476, 478, 482, 483 cap-list 466, 678VM/HSC 6.0 System Programmer’s Guide478, 680VM/HSC 6.0 System Programmer’s Guide RECover Host command recovery functions Index682VM/HSC 6.0 System Programmer’s Guide SRVlev command Index684VM/HSC 6.0 System Programmer’s Guide Index 686VM/HSC 6.0 System Programmer’s Guide 1st ed., 6/30/04 -Page Printed in U.S.A