StorageTek 6 manual Backup, Output Description, •the following data sets

Backup

This example specifies BACKup with the SLSCNTL statement to identify the primary control data set. Backup is processed without a secondary control data set and journals.

JCL for Backup of the Primary CDS without Secondary and Journals

/JOB	jobname	SLUADMIN
/PARM	MIXED
/FILE	SLSBKUP	DEV vaddr	DSN	backup.set.name
/FILE	SLSCNTL	DEV vaddr	DSN	primary.set.name
/FILE	SLSPRINT	DEV PRNT CLASS		A
/FILE	SLSIN	*
BACKUP

Output Description

Output resulting from the execution of the BACKup utility includes:

•the following data sets:

-backup of the library control data set

-copies of the primary and secondary control data sets

-reset of the control data set journals.

•a listing of input commands with appropriate messages when syntax errors occur

•messages associated with backup processing

Note: These messages may include error conditions.

•an ‘‘Errant and In-transit Location Report’’ (refer to Figure 11 on page 222)

Note: This report is normal. In-transit and possibly errant VOLSERs are normal when the HSC is active.

•a ‘‘Block Processing Report’’ and a “Block Record Element Discrepancy Report,” which may include reports of mismatches between the primary and secondary CDS (refer to Figure 11 on page 222)

Note: Unselect cards may be generated during a good backup of a primary and secondary CDS that match.

220VM/HSC 6.0 System Programmer’s Guide

1st ed., 6/30/04 - 312579601