StorageTek 6 manual HSC Diagnostic Commands, LIst Command, Syntax Parameters, data-structure

Examples:

Issuing the command:

=WHERE SLSBINIT 23FDF0

Results in the messages:

SLKOWH671I Module SLSBINIT at address 23FD50 compiled 09/20/88 14.20 SLKOWH674I Address 23FDF0 = EP : SLSBINIT +0000A0

SLKOWH674I Address 23FDF0 = CSECT: SLSBINIT +0000A0

HSC Diagnostic Commands

The following HSC diagnostic commands are provided:

•LIst command

•Display command.

The HSC LIst command is provided for diagnostic support for the HSC. Use this command under the direction of StorageTek support personnel.

LIst Command

The LIst command is used to display an HSC data structure.

Syntax

Parameters

LIst

initiates the LIst command.

data-structure

specifies the name of a single HSC data structure. It may be any one of the following:

LVT Library Vector Table

BCVT Initialization/Termination Communications Vector Table

CCV CAP Communication Vector Table

DCV Database Server Communications Vector Table

FCVT Configuration Control Communication Vector Table

HCVT Host Communication Vector Table

JCVT Job Processing Communication Vector Table

LCVT LMU Communication Vector Table

MCVT Mount/Dismount Vector Table

OCVT Operator Command Vector Table

QVT Ascomm Vector Table

RCVT Recovery Communication Vector Table

UCT Utilities Communication Vector Table

VCT Volume Cell Communication Table

Chapter 5. Problem Determination, Diagnostics, and Recovery 383

1st ed., 6/30/04 - 312579601