StorageTek 6 JCL/Parameter File Syntax, Slscntl, vaddr, control.set.name, Slsprint, Volume Report

Volume Report

Table 18. SLSVA Effect on Volume Report

HSC State:	SLSVA Specified:	SLSVA Not Specified:
Active	Use VOLATTRs pointed to	Use VOLATTRs used by the
	by SLSVA. *	HSC. *
Inactive	Use VOLATTRs pointed to	The HSC generates an error
	by SLSVA.*	message saying that SLSVA
		is missing and incorrect data
		may be reported. In addition,
		no prefix characters appear
		before the ‘‘Media’’ field on
		the report to identify media
		type discrepancies.

*If VOLATTRs have been defined, media prefix characters are displayed before the ‘‘Media’’ field if the media types reported by the LMU and the VOLATTR statements do not agree. If VOLATTRs are not present, media prefix characters are not displayed.

JCL/Parameter File Syntax

Syntax for JCL (SCP) and parameter file (CMS) definitions differs as follows:

SLSCNTL

For SCP:

/FILE SLSCNTL DEV vaddr DSN control.set.name

For CMS:

SLSCNTL vaddr DSN control.set.name

where:

vaddr

virtual address of the disk containing the CDS. For SCP, this is the address of the disk defined for the ACS service machine. For CMS, this is the address of the disk linked to the machine executing the SLUVOLR EXEC.

control.set.name

name of the control data set.

SLSPRINT

For SCP:

/FILE SLSPRINT DEV PRNT CLASS C

For CMS:

SLSPRINT PRINTER DISK fn ft fm

334VM/HSC 6.0 System Programmer’s Guide

1st ed., 6/30/04 - 312579601