StorageTek 6 manual HSC TRACE Command, Format of HSC GTRACE USR Records

HSC TRACE Command

The HSC TRace command enables or disables tracing of events in selected HSC components.

It uses GTRACE to perform the actual tracing. The SCP TRACE command must have the “USR” event enabled for any trace output to result.

For a detailed description of how to use the HSC TRACE command, refer to the HSC Operator’s Guide.

Format of HSC GTRACE USR Records

Table 23. HSC GTRACE USR Records

Offset	Length	Description
+C	2	Trace identifier
+E	5	Name of module issuing SLSTRACE macro
+13	1	Length of data area used
+14	2	Trace module offset
+16	1	Flag bits
		X’80’ Data truncated
		X’40’ Allow GTRACE recording
		X’20’ First pass
+17	1	Sequence number of this record
+18	4	Trace TBLOK address
+1C	4	Reserved
+20	1-224	Trace data from component

Notes:

• GTF REcord size = 256 Bytes

• HSC Record size may be larger than 256 Bytes

• One HSC record may require more than one GTF record.

376VM/HSC 6.0 System Programmer’s Guide

1st ed., 6/30/04 - 312579601