Paxar TCMPCL2PR manual Error Description Code

Models: TCMPCL2PR

1 217
Download 217 pages 52.55 Kb
Page 138
Image 138

MPCLII Packet Reference Manual

Error Description

Code

575The graphic included in your format could not be found.

600Imaging error because the batch was refused. Resend the batch. If the error persists, call Technical Support.

601An error occurred while the batch was imaging. Resend the batch. If the error persists, call Technical Support.

602The batch was not found during imaging. Resend the batch. If the error persists, call Technical Support.

611Font, bar code or density is invalid. The font, bar code or density in the batch does not fit the format.

612The data in this line of the batch is either missing or does not match the format.

613Reference point off tag.

614Portion of field off tag. There may be an invalid character in the packet. Make sure you did not enter O for 0.

615Bar code width is greater than 16 inches or the number of keywords for your PDF 417 bar code exceeds 928. Decrease the density or shorten the amount of data to print the bar code.

616A bad dot falls on a bar code and the dot cannot be shifted. Call Technical Support.

618Magnification must be 1 to 7 or 4 to 90 (point size) for the scalable font. The range with the scalable font on the 9490 printer is 4 to 200 points.

9-16

Page 138
Image 138
Paxar TCMPCL2PR manual Error Description Code