Chapter 9. Errors

Error Description

Code

267Baud rate selection must be 0 (1200), 1 (2400), 2 (4800), 3 (9600) or 4 (19200). Resend the communication settings packet.

268Word length selection must be 0 (7 bits), or 1 (8 bits). Resend the communication settings packet.

269Stop bits selection must be 0 (1 bit), or 1 (2 bits). Resend the communication settings packet.

270Parity selection must be 0 (none), 1 (odd), or 2 (even). Resend the communication settings packet.

271Flow control selection must be 0 (none), 1 (DTR), 2 (CTS/RTS), or 3 (XON/XOFF). Resend the communication settings packet.

272Internal code page selection must be 0 (Internal), 1 (ANSI), 2 (DOS 437), or 3 (DOS 850).

273Cut adjustment must be -99to 99 dots.

282RS232 Trailer string is too long. Use a maximum of 3 characters. See "Defining the Control Characters Packet" in Chapter 3 for more information.

283ENQ Trailer string is too long. Use a maximum of 3 characters. See "Defining the Control Characters Packet" in Chapter 3 for more information.

284The buffer type must be T (transmit), R (receive), I (image), F (format, batch data, and graphics), D (downloadable fonts), V (vector/scalable fonts). See "Defining the Memory Configuration Packet" in Chapter 3 for more information.

9-9

Page 131
Image 131
Paxar TCMPCL2PR manual Error Description Code