3Com 3CRWEASYA73, WL-575 manual Encryption, Syntax No encryption Default Setting

CHAPTER 6: COMMAND LINE INTERFACE

WEP). To place the VAP into AES only mode, use “required” and then select the “cipher-ccmp” option for the cipher-suite command.

Example

Outdoor 11a Building to Building (if-wireless g: VAP[0])#auth shared-key Outdoor 11a Building to Building (if-wireless g)#

Related Commands

encryption (6-142) key (6-143)

encryption

This command enables data encryption for wireless communications. Use the no form to disable data encryption.

Syntax

[no] encryption

Default Setting

disabled

Command Mode

Interface Configuration (Wireless-VAP)

Command Usage

•Wired Equivalent Privacy (WEP) is implemented in this device to prevent unauthorized access to your wireless network. For more secure data transmissions, enable encryption with this command, and set at least one static WEP key with the key command.

•The WEP settings must be the same on each client in your wireless network.

•Note that WEP protects data transmitted between wireless nodes, but does not protect any transmissions over your wired network or over the Internet.

•You must enable data encryption in order to enable all types of encryption (WEP, TKIP, and AES-CCMP) in the access point.

6-142