3Com WL-575, 3CRWEASYA73 manual Ethernet Interface Commands, Syntax Show bridge stp Command Mode

Using the Command Line Interface

Syntax

show bridge stp

Command Mode

Exec

Example

Outdoor 11a Building to Building#show bridge stp

Bridge MAC	:	00:12:CF:05:B7:84
Status	:	Disabled
priority	:	0
designated-root	: priority = 0, MAC = 00:00:00:00:00:00
root-path-cost	:	0
root-Port-no	:	0	Seconds
Hold Time	:	1
Hello Time	:	2	Seconds
Maximum Age	:	20	Seconds
Forward Delay	:	15	Seconds
bridge Hello Time	:	2	Seconds
bridge Maximum Age	:	20	Seconds
bridge Forward Delay	:	15	Seconds
time-since-top-change:		89185	Seconds
topology-change-count:		0
Outdoor 11a Building	to Building#

Ethernet Interface Commands

The commands described in this section configure connection parameters for the Ethernet port and wireless interface.

Table 24 Ehternet Interface Commands

Command	Function	Mode	Page
interface ethernet	Enters Ethernet interface configuration mode	GC	6-106
dns primary- server	Specifies the primary name server	IC-E	6-106
dns secondary- server	Specifies the secondary name server	IC-E	6-106
ip address	Sets the IP address for the Ethernet interface	IC-E	6-107
ip dhcp	Submits a DHCP request for an IP address	IC-E	6-108
speed-duplex	Configures speed and duplex operation on the	IC-E	6-109
	Ethernet interface
shutdown	Disables the Ethernet interface	IC-E	6-109
show interface ethernet	Shows the status for the Ethernet interface	Exec	6-110

6-105