CHAPTER 6: COMMAND LINE INTERFACE
exit
This command returns to the Exec mode or exits the configuration program.
Default Setting
None
Command Mode
Any
Example
This example shows how to return to the Exec mode from the Interface
Configuration mode, and then quit the CLI session:
Outdoor 11a Building to Building
Outdoor 11a Building to Building #exit
CLI session with the Access Point is now closed
Username:
ping
This command sends ICMP echo request packets to another node on the network.
Syntax
ping <host_name ip_address>
•host_name - Alias of the host.
•ip_address - IP address of the host.
Default Setting
None
Command Mode
Exec
Command Usage
•Use the ping command to see if another site on the network can be reached.
•The following are some results of the ping command:
-Normal response - The normal response occurs in one to ten seconds, depending on network traffic.
-Destination does not respond - If the host does not respond, a “timeout” appears in ten seconds.
