Using the Command Line Interface
Default Setting
None
Command Mode
Exec
Example
Outdoor 11a Building to Building #show radius
Radius Server Information
========================================
IP | : 0.0.0.0 |
Port | : 1812 |
Key | : ***** |
Retransmit | : 3 |
Timeout | : 5 |
Radius MAC format | : |
Radius VLAN format : HEX
========================================
Radius Secondary Server Information
========================================
IP | : 0.0.0.0 |
Port | : 1812 |
Key | : ***** |
Retransmit | : 3 |
Timeout | : 5 |
Radius MAC format | : |
Radius VLAN format : HEX
========================================
Outdoor 11a Building to Building #
802.1X Authentication
The access point supports IEEE 802.1X access control for wireless clients. This control feature prevents unauthorized access to the network by requiring an 802.1X client application to submit user credentials for authentication. Client authentication is then verified by a RADIUS server using EAP (Extensible Authentication Protocol) before the access point grants client access to the network. The 802.1X EAP packets are also used to pass dynamic unicast session keys and static broadcast keys to wireless clients.
