3Com 3CRWEASYA73, WL-575 manual Configuring SNMPV3 Users, Configuring SNMPv3 Users

CHAPTER 5: SYSTEM CONFIGURATION

„dot1xMacAddrAuthSuccess - A client station has successfully authenticated its MAC address with the RADIUS server.

„dot1xMacAddrAuthFail - A client station has failed MAC address authentication with the RADIUS server.

„dot1xAuthNotInitiated - A client station did not initiate 802.1X authentication.

„dot1xAuthSuccess - A 802.1X client station has been successfully authenticated by the RADIUS server.

„dot1xAuthFail - A 802.1X client station has failed RADIUS authentication.

„localMacAddrAuthSuccess - A client station has successfully authenticated its MAC address with the local database on the access point.

„localMacAddrAuthFail - A client station has failed authentication with the local MAC address database on the access point.

„sntpServerFail - The access point has failed to set the time from the configured SNTP server.

CONFIGURING SNMPV3 USERS

The access point allows up to 10 SNMP v3 users to be configured. Each user must be defined by a unique name, assigned to one of three pre-defined security groups, and configured with specific authentication and encryption settings.

Figure 21 Configuring SNMPv3 Users

User – The SNMPv3 user name. (32 characters maximum)

Group – The SNMPv3 group name. (Options: RO, RWAuth, or RWPriv; Default: RO)

„RO – Read-only access.

„RWAuth – Read/write access with user authentication.

„RWPriv – Read/write access with both user authentication and data encryption.

5-22