3Com WL-575, 3CRWEASYA73 manual Wireless Security Commands, Show rogue-ap

Using the Command Line Interface

show rogue-ap

This command displays the current rogue AP database.

Command Mode

Exec

Example

Outdoor 11a Building to Building #show rogue-ap

802.11a Channel :	Rogue AP Status	Channel(MHz) RSSI Type Privacy RSN
AP Address(BSSID)	SSID

======================================================================

802.11g Channel :	Rogue AP Status	Channel(MHz) RSSI Type Privacy RSN
AP Address(BSSID)	SSID

======================================================================

00-04-e2-2a-37-23	WLAN1AP	11(2462 MHz)		17	ESS	0	0
00-04-e2-2a-37-3d	ANY	7(2442	MHz)	42	ESS	0	0
00-04-e2-2a-37-49	WLAN1AP	9(2452	MHz)	42	ESS	0	0
00-90-d1-08-9d-a7	WLAN1AP	1(2412	MHz)	12	ESS	0	0
00-30-f1-fb-31-f4	WLAN	6(2437	MHz)	16	ESS	0	0

Outdoor 11a Building to Building #

Wireless Security Commands

The commands described in this section configure parameters for wireless security on the 802.11a and 802.11g interfaces.

Table 27 Wireless Security Commands

Command	Function	Mode	Page
auth	Defines the 802.11 authentication type allowed by	IC-W-VAP	6-143
	the access point
encryption	Defines whether or not WEP encryption is used to	IC-W-VAP	6-142
	provide privacy for wireless communications
key	Sets the keys used for WEP encryption	IC-W	6-143
transmit-key	Sets the index of the key to be used for encrypting	IC-W-VAP	6-144
	data frames sent between the access point and
	wireless clients
cipher-suite	Selects an encryption method for the global key used	IC-W-VAP	6-145
	for multicast and broadcast traffic
mic_mode	Specifies how to calculate the Message Integrity	IC-W	6-146
	Check (MIC)
wpa-pre-shared- key	Defines a WPA preshared-key value	IC-W-VAP	6-147

6-139