3Com WL-575, 3CRWEASYA73 manual Filter local-bridge, Filtering Commands

Using the Command Line Interface

Table 21 Filtering Commands

Command	Function	Mode	Page
filter local-bridge	Disables communication between wireless clients	GC	6-83
filter ap-manage	Prevents wireless clients from accessing the	GC	6-85
	management interface
filter uplink enable	Ethernet port MAC address filtering	GC	6-85
filter uplink	Adds or deletes a MAC address from the filtering table	GC	6-85
filter ethernet-type enable	Checks the Ethernet type for all incoming and outgoing	GC	6-86
	Ethernet packets against the protocol filtering table
filter ethernet-type	Sets a filter for a specific Ethernet type	GC	6-87
protocol
show filters	Shows the filter configuration	Exec	6-87

filter local-bridge

This command disables communication between wireless clients. Use the no form to disable this filtering.

Syntax

filter local-bridge <all-VAP intra-VAP>no filter local-bridge

all-VAP- When enabled, clients cannot establish wireless communications with any other client, either those associated to the same VAP interface or any other VAP interface.

intra-VAP- When enabled, clients associated with a specific VAP interface cannot establish wireless communications with each other. Clients can communicate with clients associated to other VAP interfaces.

6-83