Advanced Setup
Menu | Description | Page |
SNMP | Configures SNMP settings | |
Administration | Configures user name and password for management access; | |
| upgrades software from local file, FTP or TFTP server; resets |
|
| configuration settings to factory defaults; and resets the access |
|
| point |
|
WDS/STP Settings | Configures WDS bridging and Spanning Tree Protocol features | |
Syslog | Controls logging of error messages; sets the system clock via SNTP | |
| server or manual configuration |
|
RSSI | Configures RSSI value display, bridge link distance, and LED display | |
| mode |
|
Status | Displays information about the access point and wireless clients | |
AP Status | Displays configuration settings for the basic system and the | |
| wireless interface |
|
Station Status | Shows the wireless clients currently associated with the access | |
| point |
|
Event Logs | Shows log messages stored in memory | |
802.11a Interface | Configures the IEEE 802.11a interface | |
Radio Settings | Configures common radio signal parameters and other settings | |
| for each VAP interface |
|
Security | Enables each virtual access point (VAP) interface, sets the Service | |
| Set Identifier (SSID), and configures wireless security |
|
802.11b/g Interface | Configures the IEEE 802.11g interface | |
Radio Settings | Configures common radio signal parameters and other settings | |
| for each VAP interface |
|
Security | Enables each VAP interface, sets the SSID, and configures wireless | |
| security |
|