3Com WL-575, 3CRWEASYA73 manual Syntax Dhcp-relay primary secondary ipaddress, Show dhcp-relay

Using the Command Line Interface

Example

Outdoor 11a Building to Building (config)#dhcp-relay enable Outdoor 11a Building to Building (config)#

dhcp-relay

This command configures the primary and secondary DHCP server addresses.

Syntax

dhcp-relay <primary secondary> <ip_address>

•primary - The primary DHCP server.

•secondary - The secondary DHCP server.

•ip_address - IP address of the server.

Default Setting

Primary and secondary: 0.0.0.0

Command Mode

Global Configuration

Example

Outdoor 11a Building to Building (config)#dhcp-relay primary 192.254.2.10 Outdoor 11a Building to Building (config)#

show dhcp-relay

This command displays the current DHCP relay configuration.

6-43