3Com 3CRWEASYA73, WL-575 manual Ssid, Closed-system, Syntax No closed-system Default Setting

CHAPTER 6: COMMAND LINE INTERFACE

Example

Outdoor 11a Building to Building (if-wireless g: VAP[0])#description

RD-AP#3

Outdoor 11a Building to Building (if-wireless g: VAP[0])#

ssid

This command configures the service set identifier (SSID).

Syntax

ssid <string>

string - The name of a basic service set supported by the access point. (Range: 1 - 32 characters)

Default Setting

802.11a Radio: VAP_TEST_11A (0 to 3)

802.11g Radio: VAP_TEST_11G (0 to 3)

Command Mode

Interface Configuration (Wireless-VAP)

Command Usage

Clients that want to connect to the wireless network via an access point must set their SSIDs to the same as that of the access point.

Example

Outdoor 11a Building to Building (if-wireless g: VAP[0])#ssid RD-AP#3

Outdoor 11a Building to Building (if-wireless g)#

closed-system

This command prohibits access to clients without a pre-configured SSID. Use the no form to disable this feature.

Syntax

[no] closed-system

Default Setting

Disabled

6-126