Using the Command Line Interface
Default Setting
admin
Command Mode
Global Configuration
Example
Outdoor 11a Building to Building (config)#username bob
Outdoor 11a Building to Building (config)#
password
After initially logging onto the system, you should set the password. Remember to record it in a safe place. Use the no form to reset the default password.
Syntax
password <password> no password
password - Password for management access. (Length:
Default Setting
null
Command Mode
Global Configuration
Example
Outdoor 11a Building to Building (config)#password
Outdoor 11a Building to Building (config)#
ip ssh-server enable
This command enables the Secure Shell server. Use the no form to disable the server.
Syntax
ip
Default Setting
Disabled
