3Com WL-575, 3CRWEASYA73 manual Syntax Max-association count, Assoc-timeout-interval

Using the Command Line Interface

Command Mode

Interface Configuration (Wireless-VAP)

Command Usage

When closed system is enabled, the access point will not include its SSID in beacon messages. Nor will it respond to probe requests from clients that do not include a fixed SSID.

Example

Outdoor 11a Building to Building (if-wireless g: VAP[0])#closed-system Outdoor 11a Building to Building (if-wireless g)#

max-association

This command configures the maximum number of clients that can be associated with the access point at the same time.

Syntax

max-association <count>

count - Maximum number of associated stations. (Range: 0-64)

Default Setting

64

Command Mode

Interface Configuration (Wireless-VAP)

Example

Outdoor 11a Building to Building (if-wireless g: VAP[0])#max-association 32 Outdoor 11a Building to Building (if-wireless g)#

assoc-timeout-interval

This command configures the idle time interval (when no frames are sent) after which the client is disassociated from the VAP interface.

Syntax

assoc-timeout-interval <minutes>

minutes - The number of minutes of inactivity before disassociation. (Range: 5-60)

6-127