3Com WL-575, 3CRWEASYA73 manual Hostname Name of the host. Range 1-63 characters, Snmp-server trap

Using the Command Line Interface

•host_name - Name of the host. (Range: 1-63 characters)

•community-string- Password-like community string sent with the notification operation. Although you can set this string using the snmp-server host command by itself, we recommend that you define this string using the snmp-server community command prior to using the snmp-server host command. (Maximum length: 23 characters)

Default Setting

Host Address: None

Community String: public

Command Mode

Global Configuration

Command Usage

The snmp-server host command is used in conjunction with the snmp-server enable server command to enable SNMP notifications.

Example

Outdoor 11a Building to Building (config)#snmp-server host 1 10.1.19.23 batman

Outdoor 11a Building to Building (config)#

Related Commands

snmp-server enable server (6-48)

snmp-server trap

This command enables the access point to send specific SNMP traps (i.e., notifications). Use the no form to disable specific trap messages.

Syntax

snmp-server trap <trap> no snmp-server trap <trap>

•trap - One of the following SNMP trap messages:

-dot11InterfaceAFail - The 802.11a or 802.11g interface has failed.

-dot11InterfaceGFail - The 802.11b/g interface has failed.

-dot11StationAssociation - A client station has successfully associated with the access point.

-dot11StationAuthentication - A client station has been successfully authenticated.

-dot11StationReAssociation - A client station has successfully

6-49