3Com WL-575, 3CRWEASYA73 manual Sntp-server date-time, Sntp-server ip 6-38 show sntp

Using the Command Line Interface

Default Setting

Enabled

Command Mode

Global Configuration

Command Usage

The time acquired from time servers is used to record accurate dates and times for log events. Without SNTP, the access point only records the time starting from the factory default set at the last bootup (i.e., 00:14:00, January 1, 1970).

Example

Outdoor 11a Building to Building (config)#sntp-server enable Outdoor 11a Building to Building (config)#

Related Commands

sntp-server ip (6-38) show sntp (6-41)

sntp-server date-time

This command sets the system clock.

Default Setting

00:14:00, January 1, 1970

Command Mode

Global Configuration

Example

This example sets the system clock to 17:37 June 19, 2003.

Outdoor 11a Building to Building #sntp-server date-time

Enter Year<1970-2100>: 2003

Enter Month<1-12>: 6

Enter Day<1-31>: 19

Enter Hour<0-23>: 17

Enter Min<0-59>: 37

Outdoor 11a Building to Building #

6-39