3Com 3CRWEASYA73, WL-575 Syntax Bridge-link port-priority index priority, Show bridge stp

CHAPTER 6: COMMAND LINE INTERFACE

Example

Outdoor 11a Building to Building(if-wireless a)#bridge-link path-cost 1 50 Outdoor 11a Building to Building(if-wireless a)#

bridge-link port-priority

Use this command to configure the priority for the specified port.

Syntax

bridge-link port-priority <index> <priority>

•index - Specifies the bridge link number on the wireless bridge. (Range: 1-6 required on wireless interface only)

•priority - The priority for a port. (Range: 1-255)

Default Setting

128

Command Mode

Interface Configuration

Command Usage

•This command defines the priority for the use of a port in the Spanning Tree Protocol. If the path cost for all ports on a wireless bridge are the same, the port with the highest priority (that is, lowest value) will be configured as an active link in the spanning tree.

•Where more than one port is assigned the highest priority, the port with lowest numeric identifier will be enabled.

Example

Outdoor 11a Building to Building(if-wireless a)#bridge-link port-priority 1 64

Outdoor 11a Building to Building(if-wireless a)#

Related Commands

bridge-link path-cost (6-103)

show bridge stp

This command displays aging time and spanning tree settings for the Ethernet and wireless interfaces.

6-104