3Com 3CRWEASYA73, WL-575 manual Crossover Wiring

CROSSOVER WIRING

Because the 10/100 Mbps port on the power injector uses an MDI pin configuration, you must use “crossover” cable for network connections to PCs, servers or other end nodes that only have MDI ports. However, if the device to which you are connecting supports automatic MDI/MDI-X operation, you can use either “straight-through” or “crossover” cable.

EIA/TIA 568B RJ-45 Wiring Standard 10/100BASE-TX Crossover Cable

White/Orange Stripe

		Orange
	1	White/Green Stripe	1
End A	2	Blue	2	End B
	3		3
	4		4
	5	White/Blue Stripe	5
	6	Green	6
	7		7
	8	White/Brown Stripe	8

Brown

B-4