CONNECT CABLES TO THE UNIT
WARNING: Do not connect or disconnect cables or otherwise work with the
!bridge during periods of lightning activity.
1 Attach the Ethernet cable to the Ethernet port on the wireless bridge.
2 For extra protection against rain or moisture, apply weatherproofing tape (not included) around the Ethernet connector.
3 Be sure to ground the unit with an appropriate grounding wire (not included) by attaching it to the grounding screw on the unit.
4 Be sure to install a lightning arrestor on the Ethernet cable between the bridge and power injector. The lightning arrestor should be placed outdoors, immediately before the Ethernet cable enters the building.
CAUTION: Be sure that grounding is available and that it meets local and national
!electrical codes.
Console Port | PoE (Ethernet) Port |
Ground Wire
Grounding Screw
Ethernet Cable
CONNECT THE POWER INJECTOR
To connect the wireless bridge to a power source:
CAUTION: Do not install the power injector outdoors. The unit is for indoor
