CHAPTER 6: COMMAND LINE INTERFACE
Default Setting
Outdoor 11a Building to Building
Command Mode
Global Configuration
Example
Outdoor 11a Building to Building (config)#prompt RD2
RD2(config)#
system name
This command specifies or modifies the system name for this device. Use the no form to restore the default system name.
Syntax
system name <name> no system name
name - The name of this host. (Maximum length: 32 characters)
Default Setting
Outdoor 11a Building to Building
Command Mode
Global Configuration
Example
Outdoor 11a Building to Building (config)#system name AP
Outdoor 11a Building to Building (config)#
username
This command configures the user name for management access.
Syntax
username <name>
name - The name of the user.
(Length:
