3Com 3CRWEASYA73, WL-575 manual Snmp-server community, Snmp-server contact

CHAPTER 6: COMMAND LINE INTERFACE

snmp-server community

This command defines the community access string for the Simple Network Management Protocol. Use the no form to remove the specified community string.

Syntax

snmp-server community string [ro rw] no snmp-server community string

•string - Community string that acts like a password and permits access to the SNMP protocol. (Maximum length: 23 characters, case sensitive)

•ro - Specifies read-only access. Authorized management stations are only able to retrieve MIB objects.

•rw - Specifies read/write access. Authorized management stations are able to both retrieve and modify MIB objects.

Default Setting

•public - Read-only access. Authorized management stations are only able to retrieve MIB objects.

•private - Read/write access. Authorized management stations are able to both retrieve and modify MIB objects.

Command Mode

Global Configuration

Command Usage

If you enter a community string without the ro or rw option, the default is read only.

Example

Outdoor 11a Building to Building (config)#snmp-server community alpha rw Outdoor 11a Building to Building (config)#

snmp-server contact

This command sets the system contact string. Use the no form to remove the system contact information.

Syntax

snmp-server contact string no snmp-server contact

string - String that describes the system contact. (Maximum length: 255 characters)

6-46