WALL- AND POLE-MOUNTING BRACKET KIT
The wireless bridge includes a bracket kit that can be used to mount the bridge to a wall, pole, radio mast, or part of a tower structure.
SYSTEM CONFIGURATION
At each location where a unit is installed, it must be connected to the local network using the power injector module. The following figure illustrates the system component connections.
Indoor | Outdoor | |
LAN Switch |
| |
| Ethernet | |
Ethernet Cable | Cable | |
Power | Lightning | |
Arrestor | ||
Injector | ||
| ||
AC Power |
|
External Antenna
RF Coaxial Cable
Wireless Bridge Unit
Ground Wire
OPERATING MODES
The 3Com Outdoor 11a Building to Building Bridge and 11bg Access Point system provides access point or bridging services through either the 5 GHz or 2.4 GHz radio interfaces.
The unit supports both
Wireless bridge units can be used as regular 802.11a/b/g access points connected to a local wired LAN, providing connectivity and roaming services for wireless clients in an outdoor area. Units can also be used purely as bridges connecting remote LANs. Alternatively, you can employ both access point and bridging functions together, offering a flexible and convenient wireless solution for many applications.
