Panasonic AW-HE870N Mounting, Lens mounting, When the pan-tilt head has been used

Mounting

The connection and installation should be done by qualified service personnel or system installers. Refer any servicing to qualified service personnel.

Lens mounting

Use the 2/3˝ bayonet type lens (such as the AW-LZ17MD9AG and AK-LZ20M85G), available as an optional accessory.

Note

Use the AW-LZ17MD9AG lens when using the camera mounted on the pan-tilt head AW-PH360. Lenses other than the AW-LZ17MD9AG cannot be used.

Do not mount the camera on the AW-PH360 when the AK-LZ20M85G is installed.

Weight balance cannot be secured.

Use the lens extension cable AW-CA12T12A if your IRIS cable is too short.

1.Rotate the lens fixing ring knob counterclockwise and remove the lens mount cap.

2.Mount the lens on the camera and rotate the lens fixing ring knob clockwise in order to fix the lens securely.

3.Connect the IRIS cable to the IRIS connector on the back panel of the camera.

When the pan-tilt head has been used

Connect the remote cable of the lens to the LENS IF (1) terminal on the pan-tilt head.

When the SDI card (AW-HHD870) is installed without using the pan-tilt head

Connect the remote cable of the lens to the ZOOM/FOCUS terminal of the SDI card.

Remote (for zoom/focus control) cable

(When the pan-tilt head is used, connect this cable to the pan-tilt head)

To lens I/F connector of pan-tilt head

IRIS cable

Lens fixing ring knob

To iris connector

To the ZOOM/FOCUS terminal when the SDI card is installed without using the pan-tilt head

- 19 -