Panasonic AW-HE870N specification

System configuration (Connections)

Connection of the Indoor Pan-tilt Head AW-PH360

Turn off the power of all the equipment before proceeding with the connections.

Connect the AC adapter (AW-PS300A) to the AW-PH360 indoor pan-tilt head.

Use 10BASE-T straight cables to connect the RP connectors on the pan-tilt heads with the CONTROL OUT TO PAN/TILT HEAD (1 to 5) connectors on the AW-RP655 multi-function controller and AW-RP555 multi hybrid control panel.

The maximum extension distance is 3281 ft. (1000 m) when using UTP category 5 cables or their equivalent.

Connect the CONTROL OUT TO PAN/TILT HEAD terminals (P1 to P5) of the AW-RP400 and the RP terminal of the AW-PH360 with a 10BASE-T straight cable when using the AW-RP400 pan/tilt control panel.

The maximum extension distance is 1640 ft. (500 m) when using UTP category 5 cables or their equivalent.

Use the camera cable provided with the pan-tilt head to connect the AW-PH360 to the unit.

Connect the iris control cable of the motorized zoom lens to the IRIS connector on the camera, and connect the zoom/focus cable to the LENS I/F (1) connector on the pan-tilt head.

Set the Controller Selection switch SW1 located inside the AW-PH360 to the “Left Side (RP605)”.

Select “SDI supported” as the transmission signal selection setting.

- 27 -

Image 27

Panasonic AW-HE870N operating instructions Connection of the Indoor Pan-tilt Head AW-PH360

Contents

Operating Instructions Installation instructions provided Risk of Electric Shock Do not Open FCC NotePage Important Safety Instructions Contents Menu item setting/changing Menu item setting/changing User ModeChanging the settings Mounting spacer Standard accessoriesPreface Operating Instructions DC cable 9.84 ft m  Down converter a standard feature Features Special notes on operation DON’TS Precautions for use DOS Precautions for installation Concerning the installation location of the cameraConcerning electromagnetic interference Tightening the mounting screws and mounting spacer Concerning the mounting screws and drop-prevention wire Parts to be provided by the customer for installation  Mounting screws M4 For attaching the drop-prevention wire Drop-prevention wire Rear view Bottom view  Major operating controls and their functionsFront view / Top view / Rear view / Bottom view Front view Top view  Lens fixing ring knob  Menu switch Menu ENTER/AWB switch ENTER/AWB  Lens mount  DOWN/BAR switch DOWN/BAR  UP/ABB switch UP/ABB Video output connector Video OUT  Iris connector Iris  Optional card slot Option Card  DC 12 V input connector 12 V G/L input connector G/L  Cable clamp When the pan-tilt head has been used MountingLens mounting Depth 3/8˝ 10 mm  Example where the camera is mounted on a ceiling or wall CeilingWall Camera mounting bracket Mounting spacer supplied  Example of mounting on a surface above Camera Indoor Pan/tilt Head AW-PH400 Video OUT System configuration Connections Connection of a remote operation panel When an SDI card AW-HHD870 has been installed Input Output Connection of the Indoor Pan-tilt Head AW-PH360  AW-IF400 Switch settings when the AW-RP400 is used HD/SD-SDI Connection of the Indoor Pan-tilt Head AW-PH400 SW1 SW2 SET UP 10BASE-T Connection of the Indoor Pan-tilt Head AW-PH405  AW-IF400 Switch settings when the AW-RP400 is used HD/SD HD/SD-SDI Connection of the Outdoor Pan-tilt Head AW-PH650  AW-IF400 Switch settings when the AW-RP400 is used HD/SD Control exercised from the Remote Operation Panel AW-CB400 How to operate the system How to operate the system Procedure for camera menu operation AW-CB400 Jog dial main How to operate the system Procedure for camera menu operation AW-RP655 How to operate the system Mode How to operate the system Procedure for camera menu operation AW-RP555 Use Mode Setting Use mode setting Selecting Operating procedure Adjust the black balanceTake the shots Iris gain control in a lens AdjustmentFlange back adjustment For zoom lens Automatic iris power zoom lens  Automatic white balance control AWB AWB A/AWB B White balance adjustment  Automatic tracking white balance setting ATW  Manual white balance setting Preset of 3200K or 5600K white balance Black balance adjustment Total pedestal level adjustment Genlock adjustment  Horizontal phase controlWhen adjusting the phase of HD signals Adjustment by camera menu When adjusting the phase of SD signals  Color phase adjustment Menu item setting/changing Menu item setting Setting when using the camera by itself Main menu of Halogen, Fluorescent, Outdoor Mode Main menu of User Mode Main menu screen Sub menu Halogen, Fluorescent, Outdoor Mode  Detecting ratio adjustment Light PEAK/AVG P50 to A50 Description of the setting screen DB to -1 dB  Gain setting Gain Auto, -6 dB to 18 dB AGC maximum gain setting AGC Max Gain 6 dB, 12 dB, 18 dB  Black level setting Pedestal -150 to +150  Skin color adjustment Flesh Tone -3 to +3  Color Set  Chroma level adjustment Chroma Level -3 to +3  Detail level setting Level Off, Low, High  Clean DNR setting Clean DNR Off, Low, High  SD 480i 2D LPF SD 2D LPF Off, Low, High  Subcarrier phase fine adjustment SC Fine -127 to +127 Video output format setting Format 480i, 720p Horizontal phase can be adjusted when a genlock signal Iris Control NG  Component output setting Component RGB, Y/Pb/Pr, Y/CPage  HD Detail Set Display Menu item setting/changing User ModeSub menu User Mode  Brightness Set Display  SD Detail Set Display  Color Matrix Set Display Color Correction Set Display  Other Set Display  G/L Set Display  Detecting ratio adjustment Light PEAK/AVG P50 to A50  Gain setting Gain Auto, -6 dB to 18 dB  AGC maximum gain setting AGC Max Gain 6 dB, 12 dB, 18 dB Black level setting Pedestal -150 to +150 Pedestal, B Pedestal  Color Set  Chroma level adjustment Chroma Level -3 to +3  Detail band setting Detail Band 1 to  Noise suppress level setting Noise Suppress 1 to Level dependent level setting Level Dependent 0 % to 25 %  Dark detail level setting Dark Detail 0 to  Chroma detail level setting Chroma Detail 0 to Clean DNR setting Clean DNR Off, Low, High  Detail band setting Detail Band 1 to  Noise suppress level setting Noise Suppress 1 to Level dependent level setting Level Dependent 0 % to 25 %  Dark detail level setting Dark Detail 0 to  Chroma detail level setting Chroma Detail 0 to Clean DNR setting Clean DNR Off, Low, High Linear Matrix B-R MatrixB-R -31 to +31 Linear Matrix R-B MatrixR-B -31 to +31Linear Matrix G-R MatrixG-R -31 to +31 Linear Matrix G-B MatrixG-B -31 to +31 Color Correction Set  Knee level setting Knee Point 88 % to 98 %, Dynamic  G/L Set  Horizontal phase adjustment H Phase -206 to +49 Subcarrier phase fine adjustment SC Fine -127 to +127  Other Set  Gamma level setting Gamma 0.35 to  Video output format setting Format 480i, 720p  Flare correction level setting Flare R/G/B 0 to Black stretch setting Black Stretch Off, On  EBU matrix setting EBU Matrix Set Off, On  Component output setting Component RGB, Y/Pb/Pr, Y/C Menu item setting/changing User Mode Changing the format settings Changing the settings Changing the component setting Setting the EBU matrix Setting to initial set Setting to initial set Factory presets  Halogen, Fluorescent, Outdoor Mode Initial settings of the setting items Factory preset values User EBU Matrix Set Cannot operate TroubleshootingNo power Using the controller  Check that the unit and lens have been connected properly LensCannot display Menus They are disturbed SettingsCamera’s images Are not displayed or Pictures are too Something is wrongWith the coloring Pictures Displayed Controller’s Indicators flashFan Error is Multiple color bands Color bars are Unit inch mm Appearance Specifications White balance Video output format settingInput/Output connectors Indicator Ambient operating humidity Allowable temperature rangesDimensions W  H  D Weight Memo Memo Eastern Zone