Panasonic AW-HE870N Setting to initial set Factory presets, Setting to initial set

Setting to initial set (Factory presets)

Setting to initial set

In case of the wrong setting in any use mode, take the following steps to return to the initial settings.

When initialization is performed, all of the camera menu’s setting values except for Format and Component will return to factory presets.

1.Select “Initialize Data” on the main menu screen of each Use Mode.

Press the ENTER/AWB switch, then “Initialize Data” screen below is displayed for about 10 seconds.

Initialize Data

(Halogen Mode)

Do you want to initialize Halogen Mode settings?

O.K.

CANCEL

Note

When initialization is performed, all values set prior to initialization will be cleared, and they cannot be restored.

2.Select O.K. and press the ENTER/AWB switch within about 10 seconds to return to the initial settings, the existing settings are initialized, the screen below is displayed, and the camera returns to main menu.

Halogen Mode

initialized

3.If the CANCEL is selected and ENTER/AWB switch is pressed, or if the O.K. is selected and the ENTER/AWB switch is not pressed, within about 10 seconds, the screen below is displayed, and the camera returns to main menu, and the existing settings are not initialized.

Halogen Mode

unchanged

- 89 -