System configuration (Connections)

Connection of the Indoor Pan-tilt Head AW-PH405 (continued)

When an SDI card (AW-HHD870) has been installed

Use a coaxial cable to connect the SDI OUT connector on the SDI card and the SDI IN connector on the AW-PH405.

Use a coaxial cable to connect the SDI connector on the AW-PH405 to the SDI input connector on the color monitor.

Note

When transmitting HD (1080i or 720p) analog component signals, the switch inside the AW-PH405 main unit must be set to the HD position (the operation of the cable compensation circuit is not involved). Consult your dealer.

AW-IF400 Switch settings (when the AW-RP400 is used)

SW1

SW2

 

SET UP

 

1

2

3

4

 

 

OFF

ON

OFF

ON

OFF

OFF

- 34 -

Page 34
Image 34
Panasonic AW-HE870N operating instructions  AW-IF400 Switch settings when the AW-RP400 is used