Adjustment

Genlock adjustment

Phase adjustments must be performed with the camera menu when external synchronizing signals are supplied to the system in cases where multiple cameras are used or peripheral devices are connected.

Please contact your dealer for the adjustment.

Notes

When horizontal phase adjustment is moved, color phase is also moved.

Adjust color phase whenever horizontal phase adjustment is moved.

Phases of the composite and Y/C signals are interlocked for adjustments.

Three-value synchronizing signals of the HD format are not supported.

When using external synchronization, only the output signal for the selected video output format (Format) will be synchronized (1080i, 720p, or 480i).

When selecting an HD format (1080i or 720p), neither the VIDEO OUT signal (composite signal) nor the Y/C signal output from the AW-CA50T8

S-Video terminal will be synchronized with the external synchronizing signal.

To synchronize the VIDEO OUT signal (composite signal) or the Y/C signal output from the AW-CA50T8 S-Video terminal with the external synchronizing signal, use “480i” as the video output format (selected from the camera menu).

Horizontal phase control

The phases of the HD signals (1080i, 720p) and SD signals (480i) are interlocked for adjustments.

When adjusting the phase of HD signals

Observe the waveforms of signal outputs on other HD equipment and the HD analog signal output of this unit on a two-channel oscilloscope.

Then match the horizontal phase of both signals by adjusting them with the horizontal phase control of the camera menu.

- 57 -

Page 57
Image 57
Panasonic AW-HE870N Genlock adjustment,  Horizontal phase control, When adjusting the phase of HD signals