Panasonic AW-HE870N operating instructions Depth 3/8˝ 10 mm

Mounting

The connection and installation should be done by qualified service personnel or system installers. Refer any servicing to qualified service personnel.

Mounting the camera onto a pan-tilt head, tripod, camera mounting bracket, or other part

1.Use the camera mounting screw holes to mount onto a pan-tilt head, tripod, camera mounting bracket, or other part.

2.Fit the supplied mounting spacer into the camera mounting screw holes on the camera’s top surface when mounting the camera with its bottom surface, or on the camera’s bottom surface when mounting the camera with its top surface, and attach the drop-prevention wire using the mounting screw (M4).

When the unit is to be mounted onto a Panasonic pan-tilt head, use the mounting screws and drop-prevention wire that are supplied with the pan-tilt head.

When the unit is to be mounted onto a tripod, camera mounting bracket, or other part, refer to page 14, and provide your own drop-prevention wire, mounting screws, and washers.

Camera mounting screw holes

(Inch screws: 1/4-20UNC),

Depth: 3/8˝ (10 mm)

Camera mounting adapter

- 20 -