- 43 -
Control exercised from the Multi-Function Controller AW-RP655 (continued)
*1 : When PRESET 3200K or PRESET 5600K is selected in the camera menu, everything turns off when the camera menu is turned
OFF.
*2 : The lamp of the ABB or AWB switch flashes while automatic white balance or automatic black balance is being executed,
respectively. When ABB or AWB is completed successfully, the corresponding lamp goes off; when it is not completed
successfully, it lights up.
*3 : The switch lights without AWB being executed when the white balance mode of the main unit is ATW, PRESET 3200K, or
PRESET 5600K, or when the Color Bar is being displayed.
*4 : Flashing stops when communication is disconnected because the OPERATE switch has been turned OFF, CAMERA SELECT has
been switched, the communication cable has been disconnected, etc.
*5 : The switch lights without ABB being executed when the Color Bar is being displayed.
*6 : SCENE FILE, CAM/BAR, and GAINUP of each SCENE, as well as the W/B MODE, R/B GAIN and T/R/B PED statuses are
synchronized.
*7 : The R/B GAIN adjustment is not available when set to ATW, PRESET 3200K, or PRESET 5600K.
Furthermore, the R/B PEDESTAL adjustment is not available when set to PRESET 3200K or PRESET 5600K.
*8 : In GAIN adjustment mode, the range of –6 dB to –1 dB cannot be adjusted. When a setting outside of 0 dB to 18 dB is desired,
this can be specified in the camera menu’s gain setting (Gain).
How to operate the system