Mounting

The connection and installation should be done by qualified service personnel or system installers. Refer any servicing to qualified service personnel.

3.When mounting the camera onto a pan-tilt head (AW-PH400), do not use the anchoring rubber piece supplied with the pan-tilt head.

If this rubber piece is used, the camera’s ventilation holes will be blocked, causing the temperature inside the camera to rise and possibly resulting in a malfunction.

Do not use the anchoring rubber piece when mounting the AW-HE870 camera.

Indoor Pan/tilt Head AW-PH400

Notes

For the specifications of the camera mounting screw holes, refer to “Major operating controls and their functions” on page 15.

When using the camera mounting screw holes on the camera’s top surface (when mounting the camera by suspending it), take care not to block the ventilation holes of the cooling fan.

When using the camera mounting screw holes on the camera’s top surface (when mounting the camera by suspending it), attach the drop-prevention wire to the camera mounting screw holes on the camera’s bottom surface.

Do not mount the camera upside down because this will cause the temperature inside the camera to rise, possibly resulting in a malfunction.

When mounting the camera onto a pan-tilt head, mount it securely after obtaining a full understanding of the mounting procedure in the operating instructions of the pan-tilt head.

- 23 -

Page 23
Image 23
Panasonic AW-HE870N operating instructions Indoor Pan/tilt Head AW-PH400