Main menu - Service menu
After calling up the menu you will see the following display:
You can choose between various different menus:
-Automatic Software Update
-Software Update
-Software update by USB
-Factory Reset
In addition, the following information is displayed in the service menu under the “Factory Reset” option:
-Operating software version currently in use on the receiver
-Date of the last update of the channel list
-Date of the last update of the receiver operating software
Use the buttons to select the desired menu and confirm your selection using the button.
Automatic Software Update
Select the required setting (On/Off) using the buttons.
Setting “Off”:
The receiver does not automatically search for new software available every day when updating the 
data and does not compare the channel list you have stored on the receiver with the delta channel list transmitted. However, you can perform a software update manually at any time, as described under “Software update”.
Setting “On”:
The receiver automatically searches for new software available every day when updating the 
data and does compares the channel list you have stored on the receiver with the delta channel list transmitted. Your channel list is not overwritten, only updated. For example, if the name or frequency of a channel changes, the old parameters for the affected channel are replaced by the new ones in your channel list on the receiver. The channel is not moved in the channel list. New channels that have not yet been saved in your channel list are added to the end of the list. Channels that are no longer broadcast are deleted.
Note: The receiver does not make the changes automatically without your approval, they are buffered until the next time the receiver is started.
105
