Connection and setup
Audio format via HDMI
Here you can select the type of audio signal that is transmitted by the HDMI interface. Select the signal that your TV set can process:
-Decoded PCM or
-S/PDIF format
Auto Dolby Digital output
Here you can select whether the receiver should automatically select the Dolby Digital soundtrack (if this is transmitted).
Important instruction for picture output using “YUV”:
The “YUV” output can be used only if “RGB” is not selected as the output signal for the TV Scart socket!
In this case, select “Y/C” or “CVBS” as the output signal for the TV Scart socket.
Press the (green) button to move to the next menu.
The following display appears:
Tuner configuration should be performed by a specialist engineer for the respective reception system.
You should only perform the tuner configuration yourself if you are fully familiar with the particulars of your reception system.
TV Scart Output
Select the type of video signal at the TV Scart socket here. Select the signal that your TV set can process.
-CVBS – Colour Video Baseband Signal
-RGB – Red/Green/Blue signal or
-Y/C –
VCR Scart signal output
Select the type of video signal at the VCR Scart socket here. Select the signal that your external recorder can process.
-CVBS – Colour Video Baseband Signal or
-Y/C –
Auto Dolby Digital output
Here you can select whether the receiver should automatically output the Dolby Digital signal (if this is transmitted).
You can set up the tuner configuration for the following types of reception systems:
-DiSEqC™1.0
-DiSEqC™1.1
-Motorized antenna (DiSEqC™1.2/DiSEqC™1.3)
-Simple LNB or
-OneCable System
If your reception system is a one cable system, go to the “OneCable System” option and continue from there. For all other types of reception systems, continue from the next page.
16
