Main menu - Channel search
Network Search
Use the buttons (On/Off) to select whether a network search should be performed. If you set the network search to “Off”, only the factory default transponders for the satellite(s) you previously selected will be searched for new as yet unsaved channels. If you set the network search to “On”, the transponder network enables additional transponders that have not yet been stored to be located. They are then stored and searched for new channels in the
same way as the existing transponders. Once you have made all the settings, use the buttons to switch to the
“Start search” field and confirm the start of the search using the button. The following displays appear (example):
TV channels |
| Radio channels |
found |
| found |
|
|
|
During the search you will see the following display (example):
The new channels found are identified by the suffix “New” (see example screenshot on the right).
Note:
You can cancel the search at any time by pressing the
button.
After completion of the search, you will see the following display (example):
Press the button. The new channels found are added at the end of the existing complete list.
Press the button to return to the TV picture. The new channels can now be selected in the channel list.
